Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Replacing the air filter element

Atlas Copco QAX 12-20-30 Dd — Replacing the air filter element

For the Atlas Copco QAX 12-20-30 Dd.

Applies to: Atlas Copco QAX 12-20-30 Dd

Procedure

  1. Release the snap clips (1) and remove the dust trap (2). Clean the
  2. Remove the element (4) from the housing (5).
  3. Reassemble in reverse order of dismantling.
  4. Inspect and tighten all air intake connections.
  5. Reset the vacuum indicator.

Source: manual:QAX 12-20-30 Inst 2006 .pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.