Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Activating a dry-charged battery

Atlas Copco QAX 12-20-30 Dd — Activating a dry-charged battery

For the Atlas Copco QAX 12-20-30 Dd.

Applies to: Atlas Copco QAX 12-20-30 Dd

Procedure

  1. Take out the battery.
  2. Battery and electrolyte must be at equal temperature above 10°C.
  3. Remove cover and/or plug from each cell.
  4. Fill each cell with electrolyte until the level reaches 10 to 15 mm

Source: manual:QAX 12-20-30 Inst 2006 .pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.