Allmand — Change of Element in Fuel Pre-filter
Maintenance
From a Allmand service manual — check it applies to your exact model before use.
Before you start
- Be careful to remove the cup because it is filled with fuel. Wipe out spilt fuel completely.
Procedure
- Turn fuel selector valve to OFF position.
- Loosen drain valve and drain out condensed water inside.
- Turn the cup to the left and remove it; be careful it is filled with fuel.
- Remove float inside cup.
- Wash element and cup inside with new fuel.
- Replace element and O-ring if broken or damaged.
- Assemble in reverse procedure.
Specs & values
- Tightening torque of cup: 239－292 lbf･in (27－33 N･m) [280－340 kgf･cm]
Source: Allmand service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.