Allis-Chalmers — Fuel Filter Replacement
Maintenance · Fuel filters
From a Allis-Chalmers owner's manual covering: 11000, 11000 MKIT, 11000MKII, T1Q00GMKII. Check it applies to your exact model before use.
Applies to: Allis-Chalmers 11000 / 11000MKII engine
Before you start
- Do not use any tools to tighten filter. Do not use sealing compounds. Always use an Allis-Chalmers replacement filter.
Parts for this job
- 4347782 Fuel filter buy
Part numbers from the service-parts list for Allis-Chalmers 11000 / 11000MKII engine. Verify against your serial number before ordering; some links are affiliate links.
Procedure
- Remove dirt around filter and clean filter head and surrounding area.
- Close fuel tank shutoff valve if fuel level is above filter level.
- Unscrew and remove filter and o-ring from filter head; discard.
- Wipe filter contact surface of header with lint-free cloth.
- Position new o-ring on threaded insert and apply light oil coating to filter gasket.
- Screw new filter by hand until gasket contacts base of head; tighten 1/2 to 3/4 turn more by hand.
- Open fuel tank shutoff valve and prime the low pressure system.
Full service-parts list: Allis-Chalmers 11000 / 11000MKII engine →
Source: Allis-Chalmers owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.