Allis-Chalmers 3500 MK II / SOOMKII 1.5 — Bypass Oil Filter Element Replacement
Maintenance · Bypass oil filter (optional)
For the Allis-Chalmers 3500 MK II / SOOMKII 1.5, from the Allis-Chalmers owner's manual.
Applies to: Allis-Chalmers 3500 MKII engine
Parts for this job
- 8826586 Oil filter FridayParts $269.99
Part numbers from the service-parts list for Allis-Chalmers 3500 MKII engine. Verify against your serial number before ordering; some links are affiliate links.
Procedure
- Clean filter cover and surrounding area; open drain cock and drain filter.
- Remove cover clamp and lift cover; remove cover gasket.
- Unscrew element counterclockwise from outlet post and lift from housing.
- Clean interior of housing and tighten drain cock.
- Install new cover gasket in lip of housing.
- Insert element and turn clockwise until firmly seated on outlet post.
- Loosen vent plug on top of cover; start engine and run at idle until oil appears, then tighten plug.
- Stop engine and check oil level; add oil to FULL mark.
Specs & values
- Bypass filter capacity 6 quarts
Full service-parts list: Allis-Chalmers 3500 MKII engine →
Source: Allis-Chalmers owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.