Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Make sure float pivot pin is properly placed and float

B48G — Make sure float pivot pin is properly placed and float

For the B48G.

Procedure

  1. Turn carburetor on its side and measure float level
  2. Position gasket on lower carburetor section and
  3. Install idle adjustment screw, throttle stop screw,
  4. Mount carburetor on intake manifold and install
  5. Mount air cleaner assembly. Connect air intake
  6. Adjust carburetor and governor according to direc-

Source: manual:965-0757_Onan_B43E_spec_A-D_B43G_spec_A-D_B48G_spec_A-G_Engine_Service_manual_06-1988.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.