Home›Cummins/Onan›Cummins/Onan DFM Series 50Hz

Cummins/Onan DFM Series 50Hz Generator Set

The Cummins/Onan DFM Series 50Hz is a 210 kW (262.5 kVA) Diesel standby generator set powered by a Cummins/Onan NTA855-G engine. It is available at 110/190 V, 115/200 V, 120/208 V, 127/220 V, 220/380 V, 230/400 V, 240/416 V and 254/440 V, 3-phase, 50 Hz and rated 798 A. It holds about 40 L (10.6 gal) of oil and 55 L (14.5 gal) of coolant. Starting uses 2 group-8 batteries rated 225 CCA at 24 V. The set measures 2896×1118×1829 mm (114.0×44.0×72.0 in) and weighs about 2867 kg (6321 lb).

210 kW
Standby
14.0 L
Displacement
40.0 L
Oil capacity
0
Document types

How to read your Cummins/Onan serial & model number →

Service parts for the DFM Series 50Hz

Grouped by system, with how many of each the parts manual calls for.

Air intake

1 required

Prices captured from merchant listings; some links are affiliate links. Confirm against your serial number before ordering.

Specifications

FuelDiesel
Frequency50.0 Hz
Standby power210 kW
Standby kVA262
ControllerYB Type
Oil capacity40.0 L
AlternatorYB (4-pole)
Voltage options110/190 V, 115/200 V, 120/208 V, 127/220 V, 220/380 V, 230/400 V, 240/416 V, 254/440 V
Phase3
Rated current798 A
Power factor0.8
Battery group8D
Battery cranking225 CCA
Battery voltage24 V
Battery quantity2
Coolant capacity55 L
Dimensions (L×W×H)2896×1118×1829 mm
Dry weight2867 kg

Engine

Cummins/Onan NTA855-G
Oil capacity40.0 L
Coolant capacity55.0 L
Displacement14.0 L
AspirationTurbocharged
Rated speed1800 rpm

Filters for the Cummins/Onan NTA855-G

8

Engine-mounted filters the filter manufacturers list for this engine family. These come from the engine, not from this generator set’s own parts list, so confirm against your serial number before ordering.

SystemFilterDescriptionCross-references
Oil filterP551670Lube Filter, Spin-On Full FlowCUMMINS 298670, CUMMINS 299670, NAPA 1970, CARBOCOL 0026 FridayParts $26.68
Oil filterP550777Lube Filter, Spin-On BypassCUMMINS 3021658, CUMMINS 33004232, NAPA 1749, BALDWIN B7577 FridayParts $43.56
Fuel filterP550105Fuel Filter, Spin-On PrimaryCUMMINS 154700, CUMMINS 154710, NAPA 3109, NAPA 3405 buy
Fuel filterP557440Fuel Filter, Spin-On SecondaryCUMMINS BM78672, BALDWIN BF970, LPM 00013505994, WALGAHN-MOTORENTECHN 00811464 FridayParts $189.69
Fuel / water separatorP558000Fuel Filter, Water Separator Spin-On Twist&DrainCUMMINS 3308638, CUMMINS 3308683, NAPA 3405, NAPA 3693 KuduParts $24.00 FridayParts $25.66
Fuel / water separatorP550106Fuel Filter, Water Separator Spin-OnCUMMINS 154789, CUMMINS 156164, NAPA 3405, BALDWIN BF957-D FridayParts $285.60
Coolant filterP554071Coolant Filter, Spin-OnCUMMINS 209604, CUMMINS 209606, NAPA 4071, WALGAHN-MOTORENTECHN 00811412 FridayParts $397.60
Coolant filterP554073Coolant Filter, Spin-OnCUMMINS 209605, CUMMINS 209607, NAPA 4073, VERSATILE 00104040 KuduParts $40.00

Maintenance & consumables

for the Cummins/Onan NTA855-G
ItemSpecCapacityPart #Interval
Air filterAir Cleaner Assembly140-1346 Amazon eBay
Fuel filter—500 hr
Oil filter—500 hr
Belt—
Coolant55.0 liters—2000 hr
OilASTM D240.0 liters—500 hr

Common questions

What size generator is the Cummins/Onan DFM Series 50Hz?

The Cummins/Onan DFM Series 50Hz is rated 210 kW standby (262.5 kVA).

What engine is in the Cummins/Onan DFM Series 50Hz?

The Cummins/Onan DFM Series 50Hz is powered by the Cummins/Onan NTA855-G engine.

What fuel does the Cummins/Onan DFM Series 50Hz use?

The Cummins/Onan DFM Series 50Hz runs on Diesel.

How much oil does the Cummins/Onan DFM Series 50Hz take?

The Cummins/Onan NTA855-G engine in the Cummins/Onan DFM Series 50Hz has an oil capacity of 40.0 liters.

What is the coolant capacity of the Cummins/Onan DFM Series 50Hz?

The Cummins/Onan DFM Series 50Hz cooling system holds 55 liters (14.5 US gallons) for the radiator system including the engine, per the manufacturer specification sheet.

What is the dry weight of the Cummins/Onan DFM Series 50Hz?

The Cummins/Onan DFM Series 50Hz has a dry weight of 2867 kg (6320 lb).

What voltage does the Cummins/Onan DFM Series 50Hz produce?

The Cummins/Onan DFM Series 50Hz is offered in 110/190 V, 115/200 V, 120/208 V, 127/220 V, 220/380 V, 230/400 V, 3-phase.

How many cold cranking amps does the Cummins/Onan DFM Series 50Hz require?

The Cummins/Onan DFM Series 50Hz uses 2 batteryies, 24 V each, 225 CCA, group 8D, per the manufacturer specification sheet.

Which alternator is fitted to the Cummins/Onan DFM Series 50Hz?

The Cummins/Onan DFM Series 50Hz uses a YB alternator. It has 4 poles.

What air filter does the Cummins/Onan DFM Series 50Hz use?

The Cummins/Onan DFM Series 50Hz uses air filter part number 140-1346.

Troubleshooting

6

Symptoms & remedies

SymptomRemedy
Engine stops cranking and fault lamp lights, after cranking approximately 75 seconds.See engine service manual for troubleshooting fuel system. After correcting problem, reset engine monitor relay by placing Run-Stop/Reset-Remote switch to Stop/Reset position, then back to the required running position.
Fault lamp lights immediately after engine starts.Check for: Overspeed condition as engine starts.
Fault lamp lights and engine shuts down after running for a period.A. Oil level. Engine will shut down if sensor is closed. b. Check engine manual for troubleshooting oil system. c. High engine temperature. Check coolant level; check water flow (city water cooled systems); check radiator for free air flow, and fan belts for tightness. See engine manual for troubleshooting cooling system. d. Check for faulty oil pressure sensor or faulty high engine temperature sensor.
Engine runs, shuts down and cranks for 75-seconds. Cranking cycle stops; fault lamp lights.Check fuel supply.
Fault lamp lights, no fault exists.To check a no-fault condition, disconnect leads from TBl terminals 29, 30 and 31. If fault lamp lights with leads disconnected, replace engine monitor board. Reconnect leads.
Overcrank fault lamp lights and engine stops cranking after approximately 75-seconds.See engine service manual for troubleshooting fuel system. After correcting fault, reset engine monitor relay by placing Run-Stop/Reset-Remote switch to Stop/Reset position, depressing Reset button, then to the required running position.

Fault codes and symptom→remedy steps extracted from this model’s service/owner documentation; verify against the official manual before servicing. Full Cummins/Onan DFM Series 50Hz troubleshooting guide (14 entries) →

Parts

2
Part #DescriptionQtySystem
140-1346Air Cleaner (Includes Element)1Air filter Amazon eBay
100-1359Engine, Replacement (Cummins NTA855G)1Service part / kit Amazon eBay

Service, wear & replacement parts referenced for this model and its engine — confirm the exact part for your serial number. See the full parts catalog to search and cross-reference.

Fuel consumption

RatingLoadL/hgal/h
Standby100%18.44.86

Available documents

Service manual — 960-0314 Onan DFM Operator's and Parts Manual (7-1975) (Onan)

This page was generated from the 1 manufacturer document above by automated extraction; every figure shown is copied from one of them. How the data is compiled.

Other sets with this engine