Specifications
| Fuel | diesel |
|---|---|
| Frequency | 60.0 Hz |
| Standby power | 22 kW |
| Standby kVA | 27 |
| Prime power | 20 kW |
| Controller | Key switch start panel with hour meter, oil pressure and coolant temperature guages |
| Voltage options | 120/208 V, 480 V |
| Phase | 3 |
| Circuit breaker | 70 A |
| Battery group | G24 |
| Battery voltage | 12 V |
| Battery quantity | 1 |
| Dimensions (L×W×H) | 3530×2130×2540 mm |
| Dry weight | 1315 kg |
| Fuel tank | 250.0 L |
| Tank runtime | 75 hr |
Maintenance & consumables
for the Isuzu 4LE| Item | Spec | Capacity | Part # | Interval | |
|---|---|---|---|---|---|
| Oil | 500-hour oil drain & service interval | — | 500 hr |
Common questions
How many kW is the Westquip WQ25LT?
The Westquip WQ25LT is rated 22 kW standby (27.0 kVA).
What engine is in the Westquip WQ25LT?
The Westquip WQ25LT is powered by the Isuzu 4LE engine.
What fuel does the Westquip WQ25LT use?
The Westquip WQ25LT runs on diesel.
What is the continuous rating of the Westquip WQ25LT?
The Westquip WQ25LT is rated 20 kW prime (25 kVA), against 22 kW standby.
How much does the Westquip WQ25LT weigh?
The Westquip WQ25LT has a dry weight of 1315 kg (2899 lb).
What size fuel tank does the Westquip WQ25LT have?
The Westquip WQ25LT has a 250 liter (66 US gallon) fuel tank, giving about 75 hours of runtime.
What voltage does the Westquip WQ25LT produce?
The Westquip WQ25LT is offered in 120/208 V, 480 V, 3-phase.
How many cold cranking amps does the Westquip WQ25LT require?
The Westquip WQ25LT uses 1 battery, 12 V each, group G24, per the manufacturer specification sheet.
Available documents
Spec sheet — WQ25-LT-WQ-35-LT-Brochure-Email (Westquip)
This page was generated from the 1 manufacturer document above by automated extraction; every figure shown is copied from one of them. How the data is compiled.