Home›Simson-Maxwell›Simson-Maxwell SGWW300 T6

Simson-Maxwell SGWW300 T6 Generator Set

The Simson-Maxwell SGWW300 T6 is a 300 kW Natural Gas standby generator set powered by a Waukesha F18GSI engine. It is available at 120/240 V, 120/208 V, 277/480 V and 347/600 V, single-phase, 60 Hz and rated 1250 A. It holds about 83.3 L (22.0 gal) of oil and 83 L (21.9 gal) of coolant. Starting uses 2 group-2 batteries rated 1000 CCA at 24 V. The set measures 3352.8×1346.2×2286 mm (132.0×53.0×90.0 in) and weighs about 10400 kg (22928 lb).

300 kW
Standby
18.0 L
Displacement
83.3 L
Oil capacity
1
Document types

Typical fuel consumption for 300–305 kW Natural Gas generators →

Compare with other 300–305 kW Natural Gas generators →

Specifications

FuelNatural Gas
Frequency60.0 Hz
Standby power300 kW
Prime power275 kW
ControllerInteliLite MRS 16
Oil capacity83.3 L
AlternatorStamford/AvK HCI434 (4-pole, Class H insulation)
Voltage options120/240 V, 120/208 V, 277/480 V, 347/600 V
Phase1, 3
Rated current1250 A
Power factor0.8
Circuit breaker1250 A
Battery group2X4D
Battery cranking1000 CCA
Battery voltage24 V
Battery quantity2
Coolant capacity83 L
Dimensions (L×W×H)3352×1346×2286 mm
Dry weight10400 kg

Engine

Waukesha F18GSI
Oil capacity83.3 L
Coolant capacity83.0 L
Displacement18.0 L
AspirationTurbocharged
Rated speed1800 rpm

Common questions

What size generator is the Simson-Maxwell SGWW300 T6?

The Simson-Maxwell SGWW300 T6 is rated 300 kW standby.

What engine is in the Simson-Maxwell SGWW300 T6?

The Simson-Maxwell SGWW300 T6 is powered by the Waukesha F18GSI engine.

What kind of fuel does the Simson-Maxwell SGWW300 T6 run on?

The Simson-Maxwell SGWW300 T6 runs on Natural Gas.

What's the oil capacity on a Simson-Maxwell SGWW300 T6?

The Waukesha F18GSI engine in the Simson-Maxwell SGWW300 T6 has an oil capacity of 83.3 liters.

How much coolant does the Simson-Maxwell SGWW300 T6 hold?

The Simson-Maxwell SGWW300 T6 cooling system holds 83 liters (21.9 US gallons) for the radiator system including the engine, per the manufacturer specification sheet.

What is the prime power rating of the Simson-Maxwell SGWW300 T6?

The Simson-Maxwell SGWW300 T6 is rated 275 kW prime, against 300 kW standby.

What is the dry weight of the Simson-Maxwell SGWW300 T6?

The Simson-Maxwell SGWW300 T6 has a dry weight of 10400 kg (22928 lb).

What voltages is the Simson-Maxwell SGWW300 T6 available in?

The Simson-Maxwell SGWW300 T6 is offered in 120/240 V, 120/208 V, 277/480 V, 347/600 V, 1, 3-phase.

How many cold cranking amps does the Simson-Maxwell SGWW300 T6 require?

The Simson-Maxwell SGWW300 T6 uses 2 batteryies, 24 V each, 1000 CCA, group 2X4D, per the manufacturer specification sheet.

What alternator does the Simson-Maxwell SGWW300 T6 use?

The Simson-Maxwell SGWW300 T6 uses a Stamford/AvK HCI434 alternator. It has 4 poles. Insulation class H.

Fuel consumption

RatingLoadL/hgal/h
Prime25%0.10140.03
Prime50%0.20280.05
Prime75%0.30450.08
Prime100%0.40560.11
Standby25%0.10140.03
Standby50%0.20280.05
Standby75%0.30450.08
Standby100%0.40560.11

Available documents

Reference — sgww300-t6 (Simson-Maxwell)

This page was generated from the 1 manufacturer document above by automated extraction; every figure shown is copied from one of them. How the data is compiled.