Service parts for the WPS180
Grouped by system, with how many of each the parts manual calls for.
Oil system
1 requiredBelts
1 requiredPrices captured from merchant listings; some links are affiliate links. Confirm against your serial number before ordering.
Specifications
| Fuel | Diesel |
|---|---|
| Frequency | 50.0 Hz |
| Standby power | 144 kW |
| Standby kVA | 180 |
| Emissions | N/A |
| Controller | PLC-920, PLC7420 |
| Oil capacity | 9.5 L |
| Alternator | Denso A127i (Class H insulation) |
| Voltage options | 415/240 V, 380/220 V, 220/127 V, 200/115 V |
| Phase | 3PH |
| Rated current | 100 A |
| Power factor | 0.8 |
| Circuit breaker | 1500 A |
| Battery group | N/A |
| Battery voltage | 12 V |
| Battery quantity | 1 |
| Coolant capacity | 21.0 L |
| Max ambient | N/A °C |
| Dimensions (L×W×H) | 2600×1571×1729 mm |
| Dry weight | 3518 kg |
| Tank runtime | N/A hr |
Maintenance & consumables
for the Leroy-Somer 1106C-E66TAG4| Item | Spec | Capacity | Part # | Interval | |
|---|---|---|---|---|---|
| Air filter | 2652C831 / 2652C832 | — | |||
| Fuel filter | 2656F843 / 2656F855 | — | |||
| Oil filter | Oil Filter | 2654A111 | Amazon eBay $23.99 NAPA $22.21 FridayParts $28.06 KuduParts $48.00 | ||
| Belt | BELT | 2614E018 | Amazon eBay $65.00 |
Common questions
What size generator is the PowerLink WPS180?
The PowerLink WPS180 is rated 144 kW standby (180.0 kVA).
What engine does the PowerLink WPS180 use?
The PowerLink WPS180 is powered by the Leroy-Somer 1106C-E66TAG4 engine.
What fuel does the PowerLink WPS180 use?
The PowerLink WPS180 runs on Diesel.
What's the oil capacity on a PowerLink WPS180?
The Leroy-Somer 1106C-E66TAG4 engine in the PowerLink WPS180 has an oil capacity of 9.5 liters.
What is the coolant capacity of the PowerLink WPS180?
The PowerLink WPS180 cooling system holds 21 liters (5.5 US gallons) for the radiator system including the engine, per the manufacturer specification sheet.
How much does the PowerLink WPS180 weigh?
The PowerLink WPS180 has a dry weight of 3518 kg (7755 lb).
What voltage does the PowerLink WPS180 produce?
The PowerLink WPS180 is offered in 415/240 V, 380/220 V, 220/127 V, 200/115 V, 3PH-phase.
How many cold cranking amps does the PowerLink WPS180 require?
The PowerLink WPS180 uses 1 battery, 12 V each, group N/A, per the manufacturer specification sheet.
What alternator does the PowerLink WPS180 use?
The PowerLink WPS180 uses a Denso A127i alternator. Insulation class H.
What oil filter does the PowerLink WPS180 use?
The PowerLink WPS180 uses oil filter part number 2654A111.
Parts
7| Part # | Description | Qty | System | |
|---|---|---|---|---|
| 2418F554 | SEAL - REAR END OIL | 1 | Seal | Amazon eBay $22.36 |
| 2418F705 | FRONT OIL SEAL | 1 | Seal | Amazon eBay $69.00 |
| 2614E018 | BELT | 1 | Belt | Amazon eBay $65.00 |
| 2654A111 | Oil Filter | 1 | Oil filter | Amazon eBay $23.99 NAPA $22.21 FridayParts $28.06 KuduParts $48.00 |
| 3681A068 | SEAL - ROCKER BOX COVER | 1 | Seal | Amazon eBay $41.44 |
| 3681E052 | PERKINS 1106 /CATERPILLAR C6.6 CYL HEAD GASKET | 1 | Gasket | Amazon eBay $84.00 FridayParts $65.00 |
| 4133L056 | THERMOSTAT | 1 | Thermostat | Amazon eBay $32.46 FridayParts $26.50 |
Service, wear & replacement parts referenced for this model and its engine — confirm the exact part for your serial number. See the full parts catalog to search and cross-reference.
Available documents
This page was generated from the 1 manufacturer document above by automated extraction; every figure shown is copied from one of them. How the data is compiled.