The Perkins 2800 Series is a generator set powered by a Perkins 2806C-E16 engine. It holds about 68 L (18.0 gal) of oil and 20.8 L (5.5 gal) of coolant.
The Perkins 2800 Series is powered by the Perkins 2806C-E16 engine.
What is the oil capacity of the Perkins 2800 Series?
The Perkins 2806C-E16 engine in the Perkins 2800 Series has an oil capacity of 68.0 liters.
Troubleshooting
2
Symptoms & remedies
Symptom
Remedy
Engine fails to start within 30 seconds
Release the start button or ignition switch. Wait for 30 seconds to allow the starter motor to cool before attempting to start the engine again. Repeat for a maximum of three times; if the engine fails to start investigate the cause.
System fault is indicated after the engine is started
Investigate the cause, if necessary use the Perkins service tool EST. Refer to the Diagnostic Manual for more information on engine diagnostics.
Fault codes and symptom→remedy steps extracted from this model’s service/owner documentation; verify against the official manual before servicing.
Service, wear & replacement parts referenced for this model and its engine — confirm the exact part for your serial number. See the full parts catalog to search and cross-reference.