Specifications
| Fuel | Diesel |
|---|---|
| Frequency | 50.0 Hz |
| Standby power | 26 kW |
| Standby kVA | 33 |
| Prime power | 24 kW |
| Emissions | Stage 2 |
| Oil capacity | 7.4 L |
| Alternator | 12 volt 65 amp alternator |
| Voltage options | 12 V |
| Power factor | 0.8 |
| Coolant capacity | 10.1 L |
| Dimensions (L×W×H) | 1045×643×951 mm |
Engine
| Oil capacity | 7.4 L |
|---|---|
| Coolant capacity | 10.1 L |
| Displacement | 3.3 L |
| Aspiration | Naturally Aspirated |
| Rated speed | 1500 rpm |
Filters for the Perkins 1103C-33G2
3Engine-mounted filters the filter manufacturers list for this engine family. These come from the engine, not from this generator set’s own parts list, so confirm against your serial number before ordering.
Listed for this engine in only one kind of machine, so they may depend on how the engine was installed:
| System | Filter | Description | Cross-references | |
|---|---|---|---|---|
| Oil filter | P554403 | Lube Filter, Spin-On Full Flow | PERKINS 26540249, NAPA 1806, BALDWIN BT216, VERSATILE 00034778 | KuduParts $22.00 |
| Oil filter | P554407 | Lube Filter, Spin-On Full Flow | PERKINS 102632, PERKINS 2564401, NAPA 1459, BALDWIN BT237 | KuduParts $25.00 FridayParts $26.84 |
| Fuel filter | P556287 | Fuel Filter, Cartridge | PERKINS 2650097, PERKINS 2650125, BALDWIN BF884, RENAULT VI 0003052535 | FridayParts $26.90 |
Service intervals
2| Item | Action | Hours | Months | Notes |
|---|---|---|---|---|
| oil and filter | Change | 450 hr | 1300 Series EDi - oil and filter changes at 450 hours reduce down time | |
| service interval | Other | 500 hr | 1100C range - 500 hour service intervals |
Extracted from the manufacturer documentation linked to this model. Values are copied as printed; confirm against your unit's manual and serial number.
Recommended fluids
| Fluid | Grade | Standard | Ambient | Capacity | Notes |
|---|---|---|---|---|---|
| Engine oil | API CH4/ACEA E5 | 1100 Series (1103C/1104C) | |||
| Engine oil | 15W40 | ACEA E3 or API CG4 | 1300 Series EDi | ||
| Engine oil | multi-grade oil | API-CH4/CI4 | 1106D-E66TAG | ||
| Engine oil | single or multigrade oil | ACEA E1 E2 or CD/SD | 1000 Series | ||
| Fuel | BS 2869 Part 2 1998 Class A2 or ASTM D975 D2 | 1000/1300 Series |
Extracted from the manufacturer documentation linked to this model. Values are copied as printed; confirm against your unit's manual and serial number.
Common questions
What is the power rating of the Perkins 1103C-33 G2?
The Perkins 1103C-33 G2 is rated 26 kW standby (33.0 kVA).
What engine does the Perkins 1103C-33 G2 use?
The Perkins 1103C-33 G2 is powered by the Perkins 1103C-33G2 engine.
What kind of fuel does the Perkins 1103C-33 G2 run on?
The Perkins 1103C-33 G2 runs on Diesel.
What is the oil capacity of the Perkins 1103C-33 G2?
The Perkins 1103C-33G2 engine in the Perkins 1103C-33 G2 has an oil capacity of 7.4 liters.
What is the cooling system capacity of the Perkins 1103C-33 G2?
The Perkins 1103C-33 G2 cooling system holds 10.1 liters (2.7 US gallons) for the radiator system including the engine, per the manufacturer specification sheet.
What is the continuous rating of the Perkins 1103C-33 G2?
The Perkins 1103C-33 G2 is rated 24 kW prime (30 kVA), against 26 kW standby.
What voltage does the Perkins 1103C-33 G2 produce?
The Perkins 1103C-33 G2 is offered in 12 V.
Which alternator is fitted to the Perkins 1103C-33 G2?
The Perkins 1103C-33 G2 uses a 12 volt 65 amp alternator alternator.
Troubleshooting
6Fault codes
| Code | Meaning |
|---|---|
| 23 | Start failed |
| 24 | Stop fail |
| 25 | Ubat |
| 26 | Underspeed |
| 27 | Vgen <, > |
| 28 | Vgen unbal |
Fault codes and symptom→remedy steps extracted from this model’s service/owner documentation; verify against the official manual before servicing. Full Perkins 1103C-33 G2 troubleshooting guide (9 entries) →
Available documents
This page was generated from the 9 manufacturer documents above by automated extraction; every figure shown is copied from one of them. How the data is compiled.