HomeNorthern LightsNorthern Lights M1064

Northern Lights M1064 Generator Set

The Northern Lights M1064 is a 1 kW (90 kVA) diesel standby generator set powered by a John Deere Powertech Tier II 4045 engine. It is available at , 3-phase and 60 Hz. It holds about 14.3 L (3.8 gal) of oil and 21 L (5.5 gal) of coolant, with a maximum ambient rating of 50 °C. Starting uses 640 batteries rated 570 CCA at 24 V. The set measures 1960×965×975 mm (77.2×38.0×38.4 in) and weighs about 1248 kg (2751 lb).

1 kW
Standby
14.3 L
Oil capacity
2
Document types

Specifications

Fueldiesel
Frequency60.0 Hz
Standby power1 kW
EmissionsTier II
ControllerS-3B
Oil capacity14.3 L
AlternatorDirect coupled, single bearing, 12 lead, reconnectable AC generator. Maintenance free brushless design.
Voltage options60 V, 50 V
Phasethree phase,single phase
Power factor[0.8]
Battery cranking570 CCA
Battery voltage24 V
Battery quantity640
Coolant capacity21 L
Max ambient50 °C
Dimensions (L×W×H)1960×965×975 mm
Dry weight1181 kg

Engine

John Deere Powertech Tier II 4045
AspirationNaturally aspirated

Maintenance & consumables

for the John Deere Powertech Tier II 4045
ItemSpecCapacityPart #Interval
Air filterCheck air cleaner every 600 hours and replace every 1000 hours.600 hr find
Fuel filterChange primary fuel filter element every 250 hours and secondary fuel filter at 600 hours.250 hr find
Oil filterChange engine oil and filter at 50 hours using API Service Category CC, CD, or CE break-in oil. Change the oil and filter again at 100 hours.50 hr find
BeltCheck belt condition every 600 hours and replace as necessary.600 hr find
CoolantCheck coolant level daily, flush cooling system every 250 hours and test thermostats every 600 hours.250 hr
OilChange engine oil and filter at 50 hours using API Service Category CC, CD, or CE break-in oil. Change the oil and filter again at 100 hours.500 hr

Common questions

What is the power rating of the Northern Lights M1064?

The Northern Lights M1064 is rated 1 kW standby.

What engine does the Northern Lights M1064 use?

The Northern Lights M1064 is powered by the John Deere Powertech Tier II 4045 engine.

What fuel does the Northern Lights M1064 use?

The Northern Lights M1064 runs on diesel.

What alternator does the Northern Lights M1064 use?

The Northern Lights M1064 uses a Direct coupled, single bearing, 12 lead, reconnectable AC generator. Maintenance free brushless design. alternator.

Parts

4
Part #DescriptionQtySystem
SP12Check fuel injection pumpFuel pump eBay PartsGeek
OL2-21Service part / kit PartsGeek
SP17Check and clean heat exchangerService part / kit Amazon eBay PartsGeek
SP18Check and clean gear oil coolerService part / kit eBay PartsGeek

Service, wear & replacement parts referenced for this model and its engine — confirm the exact part for your serial number. See the full parts catalog to search and cross-reference.

Fuel consumption

RatingLoadL/hgal/h
Prime27.0
Prime100%12.453.29
Standby

Available documents

Spec sheet — B110 M1064 spec sheets V1 (Northern Lights)Spec sheet — B110-M1064-spec-sheets-V1 (Northern Lights)Spec sheet — S110 M1064 spec sheets V1 (Northern Lights)Spec sheet — S150 Radiator cooled spec sheet V1 (Northern Lights)Spec sheet — S164 M1064H spec sheet V1 (Northern Lights)Parts manual — P1064 (Northern Lights)

Other sets with this engine