Specifications
| Fuel | Diesel |
|---|---|
| Frequency | 50.0 Hz |
| Standby power | 887 kW |
| Standby kVA | 1010 |
| Prime power | 887 kW |
| Emissions | EPA Tier 2 |
| Controller | Basler controller, Deif controller |
| Oil capacity | 110.0 L |
| Alternator | Leroy-Somer SA 50.2 L7 |
| Voltage options | 380 V, 400 V, 415 V |
| Phase | three-phase |
| Rated current | 1535 A |
| Power factor | 0.8 |
| Circuit breaker | 1535 A |
| Battery group | not specified |
| Battery voltage | not specified V |
| Battery quantity | not specified |
| Coolant capacity | 73 L |
| Max ambient | not specified °C |
| Dimensions (L×W×H) | 4720×1990×2200 mm |
| Dry weight | 7850 kg |
| Tank runtime | not specified hr |
Engine
| Oil capacity | 110.0 L |
|---|---|
| Coolant capacity | 73.0 L |
| Displacement | 40.2 L |
| Aspiration | 4-cycle |
| Rated speed | 1500 rpm |
Filters for the MTU 18V2000B26F
1Engine-mounted filters the filter manufacturers list for this engine family. These come from the engine, not from this generator set’s own parts list, so confirm against your serial number before ordering.
Listed for this engine in only one kind of machine, so they may depend on how the engine was installed:
| System | Filter | Description | Cross-references | |
|---|---|---|---|---|
| Fuel / water separator | P502404 | Fuel Filter, Water Separator Spin-On | MTU 0020920601, MTU 20920601, BALDWIN BF7987, SDMO 330510032 | KuduParts $18.00 FridayParts $20.68 |
Common questions
What size generator is the MTU 18V 2000 B26F?
The MTU 18V 2000 B26F is rated 887 kW standby (1010.0 kVA).
What engine does the MTU 18V 2000 B26F use?
The MTU 18V 2000 B26F is powered by the MTU 18V2000B26F engine.
Is the MTU 18V 2000 B26F diesel or gas?
The MTU 18V 2000 B26F runs on Diesel.
What's the oil capacity on a MTU 18V 2000 B26F?
The MTU 18V2000B26F engine in the MTU 18V 2000 B26F has an oil capacity of 110.0 liters.
What is the cooling system capacity of the MTU 18V 2000 B26F?
The MTU 18V 2000 B26F cooling system holds 73 liters (19.3 US gallons) for the radiator system including the engine, per the manufacturer specification sheet.
What is the dry weight of the MTU 18V 2000 B26F?
The MTU 18V 2000 B26F has a dry weight of 7850 kg (17306 lb).
What voltage does the MTU 18V 2000 B26F produce?
The MTU 18V 2000 B26F is offered in 380 V, 400 V, 415 V, three-phase-phase.
What battery does the MTU 18V 2000 B26F use?
The MTU 18V 2000 B26F uses not specified batteryies, not specified V each, group not specified, per the manufacturer specification sheet.
What alternator comes on the MTU 18V 2000 B26F?
The MTU 18V 2000 B26F uses a Leroy-Somer SA 50.2 L7 alternator.
Fuel consumption
| Rating | Load | L/h | gal/h |
|---|---|---|---|
| Standby | 50% | 111.0 | 207.0 |
| Standby | 75% | 155.0 | 194.0 |
| Standby | 100% | 203.0 | 190.0 |
Available documents
This page was generated from the 4 manufacturer documents above by automated extraction; every figure shown is copied from one of them. How the data is compiled.