HomeLenhardt & WagnerLenhardt & Wagner LW 570 D

Lenhardt & Wagner LW 570 D Generator Set

The Lenhardt & Wagner LW 570 D is a generator set. It holds about 2.5 L (0.7 gal) of oil, with a maximum ambient rating of 45 °C. The set measures 1475×900×1000 mm (58.1×35.4×39.4 in), weighs about 575 kg (1268 lb) and produces 88 dBA at 1 m. An integrated tank holds 15 L (4.0 gal).

2.5 L
Oil capacity
0
Document types

Specifications

Oil capacity2.5 L
Max ambient45 °C
Dimensions (L×W×H)1475×900×1000 mm
Dry weight575 kg
Sound level88.0 dBA @ 1 m
Fuel tank15.0 L

Maintenance & consumables

ItemSpecCapacityPart #Interval
Air filterChange intake filter *
Fuel filter×1500 hr
Oil filterCheck oil level
Battery
Belt×2500 hr
Coolant
Coolant filter
Oil2.5 l
Spark plug

Troubleshooting

6

Symptoms & remedies

SymptomCauseRemedy
The red warning lamp 'Oil Temperature Monitoring' lights up.• Ambient temperature too high • Cooling air flow not sufficient • Oil level too low • Cooling pipes contaminated
The red warning lamp 'Cylinder Head Temperature Monitoring' lights up.• Ventilation of the compressor room is not sufficient • Cooling air flow not sufficient • Cooling pipes contaminated
Oil pressure value stays below the minimum valueWrong compressor rotation direction, Oil level too low, Oil pump sieve contaminated, Oil intake pipe damaged / defective, Oil temperature below +5 °C - lubrication not possible, Oil temperature higher than +120 °C - oil viscosity too low, Oil pump defective
Oil pressure value stays above the maximum valueLow oil temperature, between +5 °C and +10 °C (Should stay within the range of tolerance when operation temperature is reached)
Oil pressure remains outside the range of toleranceIf oil pressure remains outside the range of tolerance, it can be adjusted at the oil pump. Increasing oil pressure: Turn adjusting screw clockwise; Reduce oil pressure: Turn adjusting screw anti-clockwise
Oil Pressure Monitoring red warning lamp lights upWrong compressor rotation direction, Oil level too low, Oil pump sieve contaminated, Oil intake pipe damaged / defective, Oil temperature below +5 °C - lubrication not possible, Oil temperature higher than +120 °C - oil viscosity too low, Oil pump defective

Fault codes and symptom→remedy steps extracted from this model’s service/owner documentation; verify against the official manual before servicing.

Parts

12
Part #DescriptionQtySystem
010346Replace all inlet and outlet valves incl. gaskets 3rd stage1Valve Amazon eBay
010347Replace all inlet and outlet valves incl. gaskets 4th stage1Valve Amazon eBay
100-025-001Air Filter1Air filter Amazon eBay
100-026-001Filling valve (optional: without filling hoses)4Oil filter Amazon eBay
100-027-001Concentric suction/pressure valve (optional: without filling hoses)1Oil filter Amazon eBay
100-028-001Coolant Filter1Belt Amazon eBay
100-029-001AIR FILTER1Air filter Amazon eBay
100-030-001Oil Filter1Oil filter Amazon eBay
100-031-001BELT1Belt Amazon eBay
100-032-001SPARK PLUG1Spark plug Amazon eBay
100-033-001Stainless steel diesel tank (optional: without stainless steel diesel tank)1Tank Amazon eBay
100-034-001Safety switch (optional: without safety switch)1Switch Amazon eBay

Service, wear & replacement parts referenced for this model and its engine — confirm the exact part for your serial number. See the full parts catalog to search and cross-reference.

Available documents