Specifications
| Fuel | No. 2 Diesel |
|---|---|
| Frequency | 60.0 Hz |
| Standby power | 60 kW |
| Prime power | 53.2 kW |
| Controller | Dynagen |
| Oil capacity | 9.8 L |
| Voltage options | 208 V, 480 V |
| Phase | 3 Phase |
| Rated current | [208.2, 90.2] A |
| Dry weight | 994 kg |
Engine
| Oil capacity | 9.8 L |
|---|---|
| Coolant capacity | 18.5 L |
| Displacement | 4.5 L |
| Aspiration | Turbocharged |
| Rated speed | 1800 rpm |
Same engine, other brands
1 brandThe Iveco/FPT NEF 45 SM2X in this set also powers 1 generator set sold under 1 other brand. Service parts and maintenance intervals for the engine are shared; enclosure, alternator, controller and ratings are not.
| Brand | Models |
|---|---|
| Iveco/FPT | HFW 60 T6U |
Maintenance & consumables
for the Iveco/FPT NEF 45 SM2X| Item | Spec | Capacity | Part # | Interval | |
|---|---|---|---|---|---|
| Air filter | Medium - duty, two-stage dry element | — | |||
| Fuel filter | Standard fuel filter | — | |||
| Oil filter | Standard fuel filter | — | |||
| Battery | Heavy-duty engine start batteries in rack with cables | — | |||
| Belt | Standard fuel filter | — | |||
| Coolant filter | Standard fuel filter | — | |||
| Spark plug | Standard fuel filter | — |
Common questions
How many kW is the Laborde Products LPI-REP-60?
The Laborde Products LPI-REP-60 is rated 60 kW standby.
What engine does the Laborde Products LPI-REP-60 use?
The Laborde Products LPI-REP-60 is powered by the Iveco/FPT NEF 45 SM2X engine.
What fuel does the Laborde Products LPI-REP-60 use?
The Laborde Products LPI-REP-60 runs on No. 2 Diesel.
How much oil does the Laborde Products LPI-REP-60 take?
The Iveco/FPT NEF 45 SM2X engine in the Laborde Products LPI-REP-60 has an oil capacity of 9.8 liters.
How much coolant does the Laborde Products LPI-REP-60 hold?
The Laborde Products LPI-REP-60 cooling system holds 18.5 liters (4.9 US gallons) for the engine, per the manufacturer specification sheet.
What is the prime power rating of the Laborde Products LPI-REP-60?
The Laborde Products LPI-REP-60 is rated 53.2 kW prime, against 60 kW standby.
How much does the Laborde Products LPI-REP-60 weigh?
The Laborde Products LPI-REP-60 has a dry weight of 994 kg (2192 lb).
What voltage does the Laborde Products LPI-REP-60 produce?
The Laborde Products LPI-REP-60 is offered in 208 V, 480 V, 3 Phase-phase.
Fuel consumption
| Rating | Load | L/h | gal/h |
|---|---|---|---|
| 1/2 load | 50% | 10.3 | 2.72 |
| 3/4 load | 75% | 14.38 | 3.8 |
| Full load | 100% | 17.41 | 4.6 |
Available documents
This page was generated from the 1 manufacturer document above by automated extraction; every figure shown is copied from one of them. How the data is compiled.