Service parts for the GV222TI
Grouped by system, with how many of each the parts manual calls for.
Belts
1 requiredPrices captured from merchant listings; some links are affiliate links. Confirm against your serial number before ordering.
Specifications
| Fuel | Natural gas |
|---|---|
| Frequency | 50.0 Hz |
| Prime power | 350 kW |
| Oil capacity | 40.0 L |
| Coolant capacity | 23 L |
| Dimensions (L×W×H) | 1704×1222×1369 mm |
| Dry weight | 1509 kg |
Engine
| Oil capacity | 40.0 L |
|---|---|
| Coolant capacity | 23.0 L |
| Displacement | 21.927 L |
| Aspiration | Turbocharged and intercooled |
| Rated speed | 1500 rpm |
Maintenance & consumables
for the Doosan GV222TIC| Item | Spec | Capacity | Part # | Interval | |
|---|---|---|---|---|---|
| Belt | V-belt | EA6O6011 | Amazon eBay |
Fault codes
1| Code | Name | Meaning | Severity | Action |
|---|---|---|---|---|
| Various | Engine diagnostic codes | CPU-95 diagnostic display module generates engine fault codes for diagnosis and remedial action | Info | Refer to section 2.4 (Diagnosis and Remedy) and 3.7 (Diagnosis and remedies of trouble causes) |
Extracted from the manufacturer documentation linked to this model. Values are copied as printed; confirm against your unit's manual and serial number.
Procedures
1Engine Disassembly repair
- Refer to section 3.1 for detailed disassembly procedures
- Document includes major component separation and inspection steps
Extracted from the manufacturer documentation linked to this model. Values are copied as printed; confirm against your unit's manual and serial number.
Common questions
What engine does the Doosan GV222TI use?
The Doosan GV222TI is powered by the Doosan GV222TIC engine.
What fuel type does the Doosan GV222TI take?
The Doosan GV222TI runs on Natural gas.
What's the oil capacity on a Doosan GV222TI?
The Doosan GV222TIC engine in the Doosan GV222TI has an oil capacity of 40.0 liters.
Troubleshooting
6Symptoms & remedies
| Symptom | Cause | Remedy |
|---|---|---|
| Engine Starting Impossible | Inspection of battery electorlytic liquid amount & gravity Inspection of loose electric wiring & short Inspection of starting switch | Normal Retighten. Replace Adjustment. Recharging |
| Engine Overheated | Check coolant level Check fan belt tension, wear or damage etc. Check fresh radiator tank cap | External Normal Too low Cooling system Operating state 1. Overload 2. Radiator core clogged Normal Replace Normal Inspect radiator Replenish Clean cooling water passage Normal Engine disassembly Internal Retighten. Replace Engine disassembly Replace Inspect cooling water leakage Damage Repair . Replace Repair . Replace Check cooling water pump Repair. Replace |
| Output insufficient | Inspection by display module diagnostic tool | Engine Generator set Others Repair . Replace Inspect gas fuel filter Inspect air cleaner Normal Adjust Replace Repair . Replace Check valve clearance Repair . Replace Normal Engine disassembly (valve assembly) Inspect cylinser head gasket for damage Retighten. Replace Normal Inspect air leakage of intercooler Inspect air leakage of air piping line Inspect ignition timing Inspect ignition system (ICM, Harness, Ignition coil, spark plug, boots etc.) Normal Adjust Check turbocharger Normal Disassemble engine Disassemble engine Polluted |
| Oil pressure lowered | Check if oil pressure gauge indicates wrongly | To low Use recommened oil (replenish) Normal Check cooling temperature Check oil amount Retighten. Replace Inspect oil quality Check oil relief valve Water mixed in oil Disassemble engine Improper Replace with recommended oil Disassemble engine Too high Refer to engine overheat Normal |
| Fuel Consumption Excessive | Cause according to use conditions 1. Overload 2. Generator set nature gas leakage | Retighten. Replace Normal Check valve clearance Adjust Inspect nature gas leakage Repair. replace (cylinder liner, piston ring, piston) Disassemble engine (valve assembly, piston, cylinder liner etc.) Inspect ignition timing Inspect compressed pressure Inspect ignition system (ICM, Harness, Ignition coil, spark plug, boots etc.) Normal Adjust |
| Oil Consumption Excessive | Cause according to use conditions 1. Excessive oil infusing 2. Continuous operation in low speed or extremely cold state | Oil leakage Normal Retighten. Replace Check compressed pressure Inspect oil leakage Inspect air cleaner Check oil quality Replace with specified oil Engine disassembly (piston, cylinder liner) Internal External Clean. Replace Disassemble cylinder head (valve stem seal) |
Fault codes and symptom→remedy steps extracted from this model’s service/owner documentation; verify against the official manual before servicing. Full Doosan GV222TI troubleshooting guide (14 entries) →
Parts
3| Part # | Description | Qty | System | |
|---|---|---|---|---|
| EA6O6011 | V-belt | Belt | Amazon eBay | |
| EA6O6012 | V-belt tension tester | Belt | Amazon | |
| EA6O6014 | Tensioning forces on the tester (new installation) | Service part / kit | Amazon |
Service, wear & replacement parts referenced for this model and its engine — confirm the exact part for your serial number. See the full parts catalog to search and cross-reference.