Specifications
| Frequency | 50.0 Hz |
|---|---|
| Standby power | 8 kW |
| Standby kVA | 10 |
| Oil capacity | 1.0 L |
| Voltage options | 120 V |
Common questions
What is the power rating of the Caterpillar XT8000?
The Caterpillar XT8000 is rated 8 kW standby (10.0 kVA).
What engine does the Caterpillar XT8000 use?
The Caterpillar XT8000 is powered by the Caterpillar XT8000 engine.
What is the oil capacity of the Caterpillar XT8000?
The Caterpillar XT8000 engine in the Caterpillar XT8000 has an oil capacity of 1.0 liters.
Troubleshooting
19Fault codes
| Code | Meaning |
|---|---|
| 2 | TPS Failure |
| 3 | Cylinder Temp. Failure |
| 4 | Air Temp. Failure |
| 5 | System Voltage Low |
| 6 | System Voltage High |
| 7 | Cylinder High Temp. |
| 8 | Barometric Pressure Sensor Failure |
| 9 | Oil Pressure Anomaly |
| 11 | Fuel Injector Failure |
| 13 | Fuel Pump Failure |
| 15 | Ignition Failure |
| 17 | ECU Internal Failure |
| 18 | Crankshaft Position Sensor Failure |
| 19 | ECU Reset |
| 22 | Engine Overspeed Failure |
| 24 | Load Stability Sensor Failure |
| 27 | Stepper Motor Stuck |
| 28 | Engine Starting Failure |
Symptoms & remedies
| Symptom | Cause | Remedy |
|---|---|---|
| Engine shuts down | Low oil pressure drops below specifications | Check engine oil level. The engine will not run if the oil is below proper level. |
Fault codes and symptom→remedy steps extracted from this model’s service/owner documentation; verify against the official manual before servicing.
Available documents
Spec sheet — 0 (Caterpillar)