Specifications
| Fuel | gas |
|---|---|
| Frequency | 50.0 Hz |
| Prime power | 360 kW |
| Oil capacity | 170.3 L |
Engine
| Oil capacity | 170.3 L |
|---|---|
| Coolant capacity | 54.9 L |
| Displacement | 27.0 L |
| Aspiration | Turbocharged-Aftercooled |
| Rated speed | 1500 rpm |
Maintenance & consumables
for the Caterpillar G3412C LE| Item | Spec | Capacity | Part # | Interval | |
|---|---|---|---|---|---|
| Air filter | Air cleaner — single element with service indicator, Air inlet adapter, Precleaner, Air cleaner rain cap | — | |||
| Fuel filter | Fuel filter | — | |||
| Oil filter | Oil filter — RH | — | |||
| Battery | Battery chargers, Charging alternators, Ammeter gauge, Ammeter gauge and wiring, Control mounting | — | |||
| Belt | Crankshaft vibration damper and pulleys, Lifting eyes | — | |||
| Coolant | Thermostats and housing, Jacket water pump, Aftercooler water pump, Aftercooler core | 54.9 L | — | ||
| Oil | Crankcase breather — top mounted, Oil cooler, Oil filter — RH, Oil pan — deep sump, Oil filler — RH in valve cover and RH dipstick | 170.3 L | — | 750 hr | |
| Spark plug | Cat Electronic Ignition System (EIS) with detonation sensitive timing | — |
Service specifications
3| Type | Item | Value | Unit | Condition |
|---|---|---|---|---|
| Other | Rating condition (diesel 7 L and higher) | 99 kPa (29.31 in Hg) dry barometer, 25°C (77°F) | SAE J1995 inlet air standard | |
| Other | Rating condition (diesel up to 6.6 L) | 100 kPa (29.5 in Hg) total barometric pressure, 1 kPa (.295 in Hg) vapor pressure, 25°C (77°F) | ISO/TR14396 inlet air standard | |
| Other | Rating condition (gas) | 100 kPa (29.61 in Hg) and 25°C (77°F) | SAE J1349 standard |
Extracted from the manufacturer documentation linked to this model. Values are copied as printed; confirm against your unit's manual and serial number.
Recommended fluids
| Fluid | Grade | Standard | Ambient | Capacity | Notes |
|---|---|---|---|---|---|
| Engine oil | EPA 2D 89.330-96 (fuel reference, Diesel <6.6 L, density 0,845-0,850 kg/L a 15 °C) | Reference condition only, not a lubricant recommendation | |||
| Fuel | 35° API, LHV 42 780 kJ/kg (18,390 Btu/lb), density 838,9 g/L (Diesel ≥7 L rating condition) | Reference fuel for Diesel rating conditions | |||
| Fuel | 35° API gravity, LHV 42 780 kJ/kg (18,390 btu/lb) | SAE J1995 | Diesel engines 7 liter and higher; used at 29°C (84.2°F) with density 838.9 g/L | ||
| Fuel | EPA 2D 89.330-96 | EPA 2D 89.330-96 | Diesel engines up to 6.6 liter; density 0.845-0.850 kg/L @ 15°C (59°F); fuel inlet temperature 40°C (104°F) | ||
| Fuel | dry natural gas, LHV 35.54 MJ/Nm3 (905 btu/ft3) | Gas ratings based on SAE J1349 standard conditions of 100 kPa (29.61 in Hg) and 25°C (77°F) |
Extracted from the manufacturer documentation linked to this model. Values are copied as printed; confirm against your unit's manual and serial number.
Common questions
What engine is in the Caterpillar G3412C LE?
The Caterpillar G3412C LE is powered by the Caterpillar G3412C LE engine.
What kind of fuel does the Caterpillar G3412C LE run on?
The Caterpillar G3412C LE runs on gas.
How much oil does the Caterpillar G3412C LE take?
The Caterpillar G3412C LE engine in the Caterpillar G3412C LE has an oil capacity of 170.3 liters.
What is the cooling system capacity of the Caterpillar G3412C LE?
The Caterpillar G3412C LE cooling system holds 54.9 liters (14.5 US gallons) for the engine, per the manufacturer specification sheet.
Available documents
This page was generated from the 6 manufacturer documents above by automated extraction; every figure shown is copied from one of them. How the data is compiled.