Specifications
Ratings spec sheet not in our library yet — see the documents below.
Engine
| Displacement | 15.2 L |
|---|---|
| Aspiration | Turbocharged and Aftercooled |
| Rated speed | 1850 rpm |
Service specifications
6| Type | Item | Value | Unit | Condition |
|---|---|---|---|---|
| Torque | Bearing Nut Torque (129-3253 Spanner Socket, 121-9871 Bearing Nut) | 2375 | N·m | |
| Torque | Bearing Nut Torque (129-3254 Spanner Socket, 119-3711 Bearing Nut) | 2375 | N·m | |
| Torque | Locknut torque (260-0626 Spanner Socket Assembly, 1T-0229 High Torque Locknut) | 985 | N·m | |
| Torque | Solenoid nut torque (FT3198 Solenoid Tool, 352-2733 solenoid) | 3.75 | Nm | +/- .75 |
| Torque | Tightening torque for 369-5916 Lifting Eyebolt (M12 Hex Bit) | 115 | N·m | |
| Torque | Working torque capacity of locknut spanner wrenches (126-6608 / 126-6609) | 950 | N·m |
Extracted from the manufacturer documentation linked to this model. Values are copied as printed; confirm against your unit's manual and serial number.
Procedures
3Installation of two-piece seal into slack adjuster piston (209-6381 Seal Installer Group) maintenance
Tools: 207-3440 Loading Mandrel, 207-3442 Ring Pusher, 207-3444 Seal Sizer, 8F-8178 Bolt
- Place 207-3440 Loading Mandrel over small piston.
- Place inner portion of two-piece seal onto mandrel and push onto piston using 207-3442 Ring Pusher. Repeat for outer portion of seal.
- With both sets of seals installed, push piston assembly into 207-3444 Seal Sizer.
- Allow seals to compress for one minute and then install small piston into large piston.
Sprocket wheel removal - 8T-5243 Adapter Group installation maintenance
Tools: 8T-5243 Adapter Group, 7B-2499 Ring, 6H-4158 Pin, 5F-9306 Arm, 8S-9975 Ram Adapter, 9S-8900 Cylinder Group
- Install adapter groups evenly spaced in the holes in the sprocket flange; install the hooked adapter (1) first, then the plate (2).
- Fasten plate to adapter with two bolts (3) and washers (4); plate retains adapter in sprocket wheel.
- Before installing remainder of tooling, loosen bolt (5) to leave about 6.35 mm (0.25 in) gap between retainer (6) and sprocket wheel.
- Install the hydraulic cylinder and the remainder of the tooling in the conventional manner.
STOR Plug Assembly application for disc brake piston retainer spring (174-5354) repair
Tools: 174-5354 STOR Plug Assembly, 134-2562 Guides, 9S-9334 Plugs, 6N-9155 Pin
- Insert four 134-2562 Guides and discontinued 130-8718 Springs as an assembly into brake group anchor exterior holes where 9S-9334 Plugs are normally located.
- Insert four 174-5354 Plug Assemblies into exterior holes and finger tighten.
- Screw in attached bolts until guide noses protrude through brake piston.
- Insert discontinued 6N-9155 Pin into each guide hole and remove bolts and plugs.
- Insert four 9S-9334 Plugs into vacated holes.
Extracted from the manufacturer documentation linked to this model. Values are copied as printed; confirm against your unit's manual and serial number.
Common questions
Which engine powers the Caterpillar 735?
The Caterpillar 735 is powered by the Caterpillar Cat C15 ACERT engine.
Parts
7| Part # | Description | Qty | System | |
|---|---|---|---|---|
| 173-6532 | Radio 12V AM/FM Deluxe | 1 | Service part / kit | Amazon eBay |
| 175-6530 | Radio 12V AM/FM | Service part / kit | Amazon eBay | |
| 214-7318 | Tool Kit and Box | 1 | Service part / kit | Amazon eBay |
| 246-0789 | Dump Body - Optional 11.3 m³ (14.8 yd³) | Service part / kit | Amazon eBay | |
| 246-0805 | Belly Guards | Service part / kit | Amazon eBay | |
| 246-0809 | Ejector Body - Optional 15.2 m³ (19.9 yd³) | Service part / kit | Amazon eBay | |
| 249-4899 | Standard Bucket* | * | Service part / kit | Amazon eBay |
Service, wear & replacement parts referenced for this model and its engine — confirm the exact part for your serial number. See the full parts catalog to search and cross-reference.
Available documents
This page was generated from the 4 manufacturer documents above by automated extraction; every figure shown is copied from one of them. How the data is compiled.