Specifications
| Frequency | 50.0 Hz |
|---|---|
| Standby power | 8 kW |
| Standby kVA | 10 |
| Prime power | 7.2 kW |
| Controller | DES7320 |
| Oil capacity | 4.9 L |
| Alternator | Leroy-Somer TAL040B (4-pole, Class H insulation) |
| Voltage options | 230 V, 400 V |
| Phase | 3 |
| Power factor | 0.8 |
| Max ambient | 50 °C |
| Dimensions (L×W×H) | 1771×700×1273 mm |
| Dry weight | 485 kg |
| Sound level | 65.0 dBA @ 7 m |
| Fuel tank | 75.0 L |
Engine
| Oil capacity | 4.9 L |
|---|---|
| Coolant capacity | 5.2 L |
| Displacement | 1.13 L |
| Aspiration | NATURAL |
| Rated speed | 1500 rpm |
Same engine, other brands
1 brandThe Perkins 403A-11G1 in this set also powers 2 generator sets sold under 1 other brand. Service parts and maintenance intervals for the engine are shared; enclosure, alternator, controller and ratings are not.
| Brand | Models |
|---|---|
| Perkins | 403A-11G1 ElectropaK, ERP-9 |
Maintenance & consumables
for the Perkins 403A-11G1| Item | Spec | Capacity | Part # | Interval | |
|---|---|---|---|---|---|
| Air filter | Dry Element | — | |||
| Fuel filter | — | ||||
| Oil filter | Spin-On Full Flow | — | 500 hr | ||
| Battery | — | ||||
| Belt | — | ||||
| Coolant | — | ||||
| Oil | 4.9 | — | 500 hr | ||
| Spark plug | — |
Common questions
What size generator is the Caps CP10-TP1?
The Caps CP10-TP1 is rated 8 kW standby (10.0 kVA).
Which engine powers the Caps CP10-TP1?
The Caps CP10-TP1 is powered by the Perkins 403A-11G1 engine.
How much oil does the Caps CP10-TP1 take?
The Perkins 403A-11G1 engine in the Caps CP10-TP1 has an oil capacity of 4.9 liters.
How much coolant does the Caps CP10-TP1 hold?
The Caps CP10-TP1 cooling system holds 5.2 liters (1.4 US gallons) for the engine, per the manufacturer specification sheet.
What is the continuous rating of the Caps CP10-TP1?
The Caps CP10-TP1 is rated 7.2 kW prime (9 kVA), against 8 kW standby.
How loud is the Caps CP10-TP1?
The Caps CP10-TP1 is rated at 65.0 dBA at 7 m, per the manufacturer specification sheet.
What is the dry weight of the Caps CP10-TP1?
The Caps CP10-TP1 has a dry weight of 485 kg (1069 lb).
How big is the fuel tank on the Caps CP10-TP1?
The Caps CP10-TP1 has a 75 liter (20 US gallon) fuel tank.
What voltages is the Caps CP10-TP1 available in?
The Caps CP10-TP1 is offered in 230 V, 400 V, 3-phase.
What alternator does the Caps CP10-TP1 use?
The Caps CP10-TP1 uses a Leroy-Somer TAL040B alternator. It has 4 poles. Insulation class H.
Fuel consumption
| Rating | Load | L/h | gal/h |
|---|---|---|---|
| Prime | 50% | 1.5 | 0.4 |
| Prime | 75% | 2.0 | 0.53 |
| Prime | 100% | 2.6 | 0.69 |
| Standby | 110% | 2.9 | 0.77 |
Available documents
This page was generated from the 1 manufacturer document above by automated extraction; every figure shown is copied from one of them. How the data is compiled.