Home›AKSA›AKSA APSD330

AKSA APSD330 Generator Set

The AKSA APSD330 is a 240 kW (300 kVA) Diesel standby generator set powered by a Cummins/Onan 6LTAA8.9-G3 engine. It holds about 27.6 L (7.3 gal) of oil and 36.5 L (9.6 gal) of coolant. The set measures 3650×1400×2100 mm (143.7×55.1×82.7 in) and weighs about 3000 kg (6614 lb). An integrated tank holds 500 L (132.1 gal).

240 kW
Standby
8.9 L
Displacement
27.6 L
Oil capacity
1
Document types

Typical fuel consumption for 240–245 kW Diesel generators →

Compare with other 240–245 kW Diesel generators →

Specifications

FuelDiesel
Standby power240 kW
Standby kVA300
Prime power220 kW
ControllerDSE 6120
Oil capacity27.6 L
Dimensions (L×W×H)3650×1400×2100 mm
Dry weight3000 kg
Fuel tank500.0 L

Engine

Cummins/Onan 6LTAA8.9-G3
Oil capacity27.6 L
Coolant capacity36.5 L
Displacement8.9 L
AspirationTurbo Charged After Cooled
Rated speed1500 rpm

Filters for the Cummins/Onan 6LTAA8.9-G3

2

Engine-mounted filters the filter manufacturers list for this engine family. These come from the engine, not from this generator set’s own parts list, so confirm against your serial number before ordering.

Listed for this engine in only one kind of machine, so they may depend on how the engine was installed:

SystemFilterDescriptionCross-references
Oil filterP553000Lube Filter, Spin-On Full FlowCUMMINS 3318853, CUMMINS 3825970, NAPA 1748, NAPA 1748XD FridayParts $125.00
Fuel / water separatorP551000Fuel Filter, Water Separator Spin-On Twist&DrainCUMMINS 3161407, CUMMINS 3329289, NAPA 3406, BALDWIN BF1259 FridayParts $99.00

Common questions

What size generator is the AKSA APSD330?

The AKSA APSD330 is rated 240 kW standby (300.0 kVA).

What engine is in the AKSA APSD330?

The AKSA APSD330 is powered by the Cummins/Onan 6LTAA8.9-G3 engine.

What kind of fuel does the AKSA APSD330 run on?

The AKSA APSD330 runs on Diesel.

How much oil does the AKSA APSD330 take?

The Cummins/Onan 6LTAA8.9-G3 engine in the AKSA APSD330 has an oil capacity of 27.6 liters.

How much coolant does the AKSA APSD330 hold?

The AKSA APSD330 cooling system holds 36.5 liters (9.6 US gallons) for the engine, per the manufacturer specification sheet.

What is the continuous rating of the AKSA APSD330?

The AKSA APSD330 is rated 220 kW prime (275 kVA), against 240 kW standby.

How much does the AKSA APSD330 weigh?

The AKSA APSD330 has a dry weight of 3000 kg (6613 lb).

How big is the fuel tank on the AKSA APSD330?

The AKSA APSD330 has a 500 liter (132 US gallon) fuel tank.

Available documents

Spec sheet — 1030 1675 Cummins EN (AKSA)

This page was generated from the 1 manufacturer document above by automated extraction; every figure shown is copied from one of them. How the data is compiled.