Perkins 1106D Industrial Engine

The cheapest captured merchant offer per filter — see the full cross-reference below for every OEM/aftermarket option.

Prices captured from merchant listings; some links are affiliate links. Verify against your serial number before ordering.

Shared across brands: Caterpillar, Perkins

How to read your Perkins engine serial & model number →

• Sensor Supply Voltage Fault 516
  Fix: Check Customer Parameters or System Parameters
• Timing Calibration Fault 143
  Fix: Service
• The engine is operating above the normal range and steam becomes apparent.
  Fix: 1. Reduce the load and the engine rpm. 2. Determine if the engine must be shut down immediately or if the engine can be cooled by reducing the load. 3. Inspect the cooling system for leaks.
• System Parameters Fault 527
  Fix: Check Customer Parameters or System Parameters
• Pump Timing Sensor Fault 142
  Fix: Service
• Oil Pressure Sensor Fault 187
  Fix: Service
• No oil pressure is indicated.
  Fix: STOP the engine.
• Maximum coolant temperature is exceeded.
  Fix: STOP the engine.
• Key Switch Fault 439
  Fix: Service
• Intermittent Battery Power to ECM 422
  Fix: Schedule Service
• Intake Manifold Temperature Sensor Fault 133
  Fix: Service
• Intake Manifold Pressure Sensor Fault 197
  Fix: Service
• If the engine has not been started for several weeks, fuel may have drained from the fuel system.
  Fix: Prime the fuel system. Refer to the Operation and Maintenance Manual, “Fuel System - Prime” for more information on priming the fuel system.
• If a fault has occurred, the fault will be logged into the memory of the Electronic Control Module (ECM).
  Fix: Retrieve the logged fault codes and reference the appropriate information to identify the nature of the event. Log any observation that could have caused the lamp to light.
• If a diagnostic lamp illuminates during normal engine operation and the diagnostic lamp shuts off, an intermittent fault may have occurred.
  Fix: Retrieve the logged fault codes. Reference the appropriate information to identify the nature of the event.

Compiled from service & troubleshooting documentation across every generator set that uses the Perkins 1106D Industrial.

Pooled from every document that names this exact engine — confirm the interval and part number against your unit's serial number.

• Air filter: Donaldson P635904 Donaldson P635980

Cross-referenced via Donaldson + OEM/engine-maker interchange — options to verify against your serial number, not confirmed for every exact variant.

• Dieci HERCULES SERIES — Telehandler

Other equipment known to use this engine, via filter-application cross-reference — useful for sourcing parts even when your exact machine isn't listed elsewhere on this page.