HomeEnginesPerkins 1106D-E66TAG2

Perkins 1106D-E66TAG2 Engine

The Perkins 1106D-E66TAG2 is a 6.6 L 6-cylinder turbocharged air-to-air aftercooling engine rated at 1800 rpm, producing up to 144.6 kW. It powers generator sets from Perkins.

Also known as: Perkins 1106D-E66TAG2

Part of the Perkins 1106D engine family — 9 variants share parts & fitment.

6.6 L
Displacement
6
Cylinders
1800 rpm
Rated speed
144 kW
Gross power

Service parts for the 1106D-E66TAG2

The cheapest captured merchant offer per filter — see the full cross-reference below for every OEM/aftermarket option.

Air intake

1 required
P635903Air filterfind

Oil system

1 required

Prices captured from merchant listings; some links are affiliate links. Verify against your serial number before ordering.

Engine specifications

Displacement6.6 L
Cylinders6
AspirationTurbocharged air-to-air aftercooling
Rated speed1800 rpm
Gross power144 kW

Maintenance schedule

ItemSpecCapacityPart #Interval
Air filterPaper ElementWA11994 Amazon eBay $114.47
Fuel filter
Oil filter2654A111 Amazon $25.11 eBay $23.99 FridayParts $28.06
Battery1x 900CCA, 2x 770 CCA
Belt
CoolantBS6580 - 1992, ASTM D3306 and ELC coolants to 1E196621.0 litres
OilAPI-CH-4/CI4 multigrade oil16.5 litres (34.9 UK pints)
Spark plug

Pooled from every document that names this exact engine — confirm the interval and part number against your unit's serial number.

Service intervals

2
ItemActionHoursMonthsNotes
oil and filterChange450 hr1300 Series EDi - oil and filter changes at 450 hours reduce down time
service intervalOther500 hr1100C range - 500 hour service intervals

Extracted from the manufacturer documentation linked to this model. Values are copied as printed; confirm against your unit's manual and serial number.

Recommended fluids

FluidGradeStandardAmbientCapacityNotes
Engine oilAPI CH4/ACEA E51100 Series (1103C/1104C)
Engine oil15W40ACEA E3 or API CG41300 Series EDi
Engine oilmulti-grade oilAPI-CH4/CI41106D-E66TAG
Engine oilsingle or multigrade oilACEA E1 E2 or CD/SD1000 Series
FuelBS 2869 Part 2 1998 Class A2 or ASTM D975 D21000/1300 Series

Extracted from the manufacturer documentation linked to this model. Values are copied as printed; confirm against your unit's manual and serial number.

Parts cataloged across the Perkins 1106D family

30
Part #DescriptionCategory
g03343019(9) Coolant outlet (10) Water pump (11) Coolant intake (12) Vibration damper (13) Belt tensioner (14) Belt (15) Belt idler pulleybelt
g03343046(26) Electric priming pump (27) Primary fuel filter (28) Mechanical priming pump (29) Primary fuel filter (30) Spin on crankcase breatherfuel_filter
i02813489Before Starting Engine The low-pressure fuel system can be pressurized for a time period after the engine has stopped operating.fuel_filter
g03342586(1) High-pressure line (2) High-pressure line (3) High-pressure line (4) High-pressure line (5) High-pressure line (6) High-pressure line (7) High-pressure fuel manifold (rail) (8) High-pressure supply line (9) High-pressure supply line The high-pressure fuel lines are the fuel lines that are between the high-pressure fuel pump and the high-pressure fuel manifold and the fuel lines that are between the fuel manifold and cylinder head. These fuel lines are different from fuel lines on other fuel systems.fuel_pump
g03344871Connector for glow plugsglow_plug
g03342264Safety warning sign (Hand High Pressure) - label for number 6 injector lineinjector
g03344866Connections for injectorsinjector
i05277329Monitoring System (Table for the Indicator Lamps)monitoring_system
g03343017(1) Secondary fuel filters (2) Crankcase breather hose (3) Oil sample valve (4) Electronic control module (5) Oil filter (6) Oil gauge (dipstick) (7) Oil drain plug (8) Oil filler capoil_filter
g00704059Illustration 9other_service
g01154807Typical exampleother_service
g01154858Typical exampleother_service
g02298225Gases from a battery can explode. Keep any open flames or sparks away from the top of a battery. Do not smoke in battery charging areas.other_service
g03341746Safety warning sign (Hand High Pressure)other_service
g03342706(4) Battery to ground (5) Ground to engine block (6) Primary position for groundingother_service
i02143194Crushing Prevention and Cutting Preventionother_service
i02234873Engine Stoppingother_service
i02251260Engine Startingother_service
i02328435General Hazard Informationother_service
i04016709Mounting and Dismounting Do not climb on the engine or the engine aftertreatment. The engine and aftertreatment have not been designed with mounting or dismounting locations. Refer to the OEM for the location of foot and hand holds for your specific application.other_service
i05240750High Pressure Fuel Lines Contact with high pressure fuel may cause fluid penetration and burn hazards. High pressure fuel spray may cause a fire hazard. Failure to follow these inspection, maintenance and service instructions may cause personal injury or death.other_service
i05241031Engine Stopping Stop the engine according to the procedure in the Operation and Maintenance Manual, “Engine Stopping (Operation Section)” in order to avoid overheating of the engine and accelerated wear of the engine components. Use the Emergency Stop Button (if equipped) ONLY in an emergency situation. Do not use the Emergency Stop Button for normal engine stopping. After an emergency stop, DO NOT start the engine until the problem that caused the emergency stop has been corrected.other_service
i05241813Model View Illustrations The following model views show typical features of the engine. Due to individual applications, your engine may appear different from the illustrations.other_service
i05271111Safety warning signother_service
i05272352Engine Electronics (Operation Section)other_service
i05302522Static Electricity Hazard when fueling with Ultra-low Sulfur Diesel Fuelother_service
g03344872Coolant temperature sensorsensor
i05275493Engine Serial Number Plate (1)serial_number_plate
g03342674(1) Ground to battery (2) Ground to starting motor (3) Starting motor to engine blockstarter
g03343041(16) Exhaust manifold (17) Front lifting eye (18) Alternator (19) Refrigerant compressor (20) Turbocharger (21) Starting motor (22) Solenoid for starting motor (23) Flywheel (24) Flywheel housing (25) Rear lifting eyeturbocharger

Parts cataloged across all variants of this engine family — verify the exact part fits your specific variant and serial number before ordering.

Filters for this engine

  • Air filter: Donaldson P635903 Wix WA11994
  • Oil filter: Perkins 2654A111 Donaldson P550920 Wix 57325

Cross-referenced via Donaldson + OEM/engine-maker interchange — options to verify against your serial number, not confirmed for every exact variant.

Also used in

9
  • Dieci HERCULES SERIES — Telehandler
  • Massey Ferguson MF5465 — Tractor
  • Massey Ferguson MF5475 — Tractor
  • Massey Ferguson MF6465 — Tractor
  • Massey Ferguson MF6475 — Tractor
  • Massey Ferguson MF6480 — Tractor
  • Massey Ferguson MF7465 — Tractor
  • Massey Ferguson MF7475 — Tractor
  • Massey Ferguson MF7480 — Tractor

Other equipment known to use this engine, via filter-application cross-reference — useful for sourcing parts even when your exact machine isn't listed elsewhere on this page.

Common questions

What is the displacement of the Perkins 1106D-E66TAG2?

The Perkins 1106D-E66TAG2 has a displacement of 6.6 liters with 6 cylinders.

Which generators use the Perkins 1106D-E66TAG2 engine?

The Perkins 1106D-E66TAG2 powers 1 generator set(s), including Perkins 1106D-E66TAG2.

What oil filter does the Perkins 1106D-E66TAG2 use?

The Perkins 1106D-E66TAG2 uses oil filter part numbers Perkins 2654A111, Donaldson P550920, Wix 57325.

What air filter does the Perkins 1106D-E66TAG2 use?

The Perkins 1106D-E66TAG2 uses air filter part numbers Donaldson P635903, Wix WA11994.