The John Deere 6068HFG06 is a 6.8 L 4-cylinder turbocharged engine rated at 1800 rpm, producing up to 257 kW. It powers generator sets from Generac and Hipower, including the MDG250 and HRJW-240 T4F. It holds 34 L (9.0 gal) of oil and 42 L (11.1 gal) of coolant.
Also known as: JOHN DEERE 6068HFG06
Part of the John Deere 6068 engine family — 57 variants share parts & fitment.
| Oil capacity | 34.0 L |
|---|---|
| Coolant capacity | 42.0 L |
| Displacement | 6.8 L |
| Cylinders | 4 |
| Aspiration | Turbocharged |
| Rated speed | 1800 rpm |
| Gross power | 257 kW |
Shared across brands: Generac, Hipower
Compiled from service & troubleshooting documentation across every generator set that uses the John Deere 6068HFG06.
| Item | Action | Hours | Months | Notes |
|---|---|---|---|---|
| maintenance alarm reset | Other | 250 hr | Maintenance/service interval warning set at 250, 500 and 3,000 hours of engine running time | |
| Automatic belt tensioner and belt wear | Check | 500 hr | 12 mo | Recommended that the belt be removed and checked for wear at the 500 hour or 12 month service interval |
| Engine oil and oil filter | Change | 500 hr | 12 mo | First service — Change oil and filter between 100–500 hours during initial operation of new or rebuilt engine with Break-In Plus; if not using John Deere Plus 50 II, decrease interval to every 250 hours |
| coolant pump weep hole | Check | 500 hr | 12 mo | |
| cooling system | Check | 1500 hr | 12 mo | |
| fuel filter elements | Replace | 500 hr | 12 mo | |
| open crankcase vent (OCV) system | Check | 500 hr | 12 mo | |
| Cooling system | Test | 2000 hr | 24 mo | Pressure test cooling system |
| Engine speeds | Check | 2000 hr | 24 mo | |
| Crankshaft vibration damper | Check | 3000 hr | 36 mo | |
| DEF dosing unit filter | Change | 3000 hr | 36 mo | |
| Engine electrical ground connection | Check | 3000 hr | 36 mo | |
| Engine mounts | Check | 3000 hr | 36 mo | |
| Engine valve clearance | Adjust | 3000 hr | 36 mo | |
| Glow plugs | Test | 3000 hr | 36 mo | Test glow plugs for continuity |
| Cooling system | Change | 4500 hr | 60 mo | Flush and refill cooling system |
| Crankshaft vibration damper | Change | 4500 hr | 36 mo | |
| Thermostats | Test | 4500 hr | 60 mo | |
| Axles and jacks | Lubricate | 12 mo | Grease axles and jacks (annually) | |
| Wheel bearings | Inspect | 12 mo | Or every 12,000 miles (19,312 km); more frequent under dusty or damp conditions | |
| jacks | Lubricate | 12 mo | Jack maintenance procedures should be performed annually (side-wind and top-wind models) | |
| trailer wheel bearings | Lubricate | 12 mo | Minimum recommended lubrication every 12 months or 12,000 miles (19,312 km); more frequent in dusty or damp conditions |
Extracted from the manufacturer documentation linked to this model. Values are copied as printed; confirm against your unit's manual and serial number.
| Type | Item | Value | Unit | Condition |
|---|---|---|---|---|
| Other | Air filter restriction (replace point) | 20 | in. H2O | When yellow center bar reaches red section on filter minder gauge |
| Other | Air filter restriction indicator - replace air filter | 20 | in. H2O | yellow center bar reaches red section |
| Other | Altitude for full prime/standby power | 10,000 | ft (3,048 m) | 5% power loss per 1,000 ft above maximum altitude |
| Other | DEF urea concentration | 31.8-33.2 | % urea | |
| Other | DEF urea concentration | 31.8–33.2 | % urea | |
| Pressure | Air filter replacement threshold (filter minder) | 20 | in. H2O | yellow center bar reaches red section |
| Pressure | Engine oil pressure - normal operating | 35-80 | psi (241-552 kPa) | engine running |
| Pressure | Low oil pressure shutdown - verify pressure reached within five seconds of restart | 5 | psi (34.5 kPa) | within five seconds |
| Pressure | Maximum tire pressure | 125 | psi (862 kPa) | |
| Pressure | Minimum oil pressure at start | 5 | psi (34.5 kPa) | Within five seconds of start |
| Pressure | Oil pressure | 5 | psi (34.5 kPa) | within five seconds of restart |
| Pressure | Oil pressure gauge range | 0-100 | psi (0-689 kPa) | |
| Speed | Engine governed operating speed | 1800 | RPM | constant |
| Speed | Engine idle speed | 1,000 to 1,200 | rpm | idle |
| Speed | Engine idle speed | 1,000-1,200 | rpm | |
| Speed | Engine operating speed | 1,800 | rpm | |
| Speed | Operating speed (governed) | 1800 | rpm | |
| Speed | Output frequency | 60 | Hz | No load connected |
| Speed | Output frequency - normal operating | 60 | Hz | no loads connected |
| Temperature | Additional cold weather starting aids required below | -13 | °F (-25 °C) | |
| Temperature | Cold weather starting aids required below | 32 | °F (0 °C) | |
| Temperature | Coolant temperature gauge range | 150-250 | °F (66-121 °C) | |
| Temperature | Coolant temperature shutdown threshold | 210 | °F (99 °C) | |
| Temperature | DEF freezing point | 12 | °F (-11 °C) | |
| Temperature | Engine coolant temperature - normal operating | 180-200 | °F (82-93 °C) | average ambient air temperature of 70 °F (21 °C) |
| Temperature | Engine coolant temperature - stop engine | 210 | °F (99 °C) | or higher |
| Temperature | High coolant temperature - stop engine immediately | 210 | °F (99 °C) | or higher |
| Temperature | Maximum air temperature for full prime power | 42 | °C | standby power |
| Temperature | Maximum air temperature for full prime power (standby) | 49 | °C | MDG150/MDG175 standby; MDG250 prime |
| Temperature | Maximum allowable coolant temperature | 235 | °F (113 °C) | |
| Torque | Generator drive plate bolts | 40 | ft-lbs (54 Nm) | |
| Torque | Generator drive plate bolts | 44 | ft-lb (56.9 Nm) | |
| Torque | Wheel lug nuts - first pass | 20-25 | ft-lb (27-33 Nm) | First pass tightening |
| Torque | Wheel lug nuts - first pass | 20–25 | ft-lb (27–33 Nm) | |
| Torque | Wheel lug nuts - second pass | 50-60 | ft-lb (67-81 Nm) | Second pass tightening |
| Torque | Wheel lug nuts - second pass | 50–60 | ft-lb (67–81 Nm) | |
| Torque | Wheel lug nuts - third pass | 90-120 | ft-lb (122-162 Nm) | Third pass tightening |
| Torque | Wheel lug nuts - third pass | 90–120 | ft-lb (122–162 Nm) | |
| Voltage | Battery voltage - normal reading (12 volt systems) | 12-14 | V | engine running |
| Voltage | Fine voltage adjustment range | ±10 | % |
Extracted from the manufacturer documentation linked to this model. Values are copied as printed; confirm against your unit's manual and serial number.
| Fluid | Grade | Standard | Ambient | Capacity | Notes |
|---|---|---|---|---|---|
| Coolant | 50/50, 40/60, 40/60, 40/60 water/antifreeze mix | above -67°C | 63.2 L | Freezing point table: 50% water/50% antifreeze = -12 °F (-24 °C); 40%/60% = -34 °F (-36 °C); 40%/60% = -54 °F (-48 °C); 40%/60% (maximum freeze protection at 60%) = -90 °F (-67 °C). Do not use chromate base rust inhibitor with propylene glycol base antifreeze, boosters, or additives. | |
| Coolant | 50% water / 50% antifreeze (down to -12 °F / -24 °C); 40% water / 60% antifreeze (to -34 °F / -36 °C and -48 °F / -48 °C, -90 °F / -67 °C); maximum freeze protection 60% | above -24°C | 63.2 L | Coolant including engine 16.7 gal (63.2 L). Do not use chromate base rust inhibitor with propylene glycol base antifreeze, boosters, or additives. | |
| Def | Aqueous Urea Solution 32 (AUS 32) | ISO 22241-1 | -11°C to 30°C | 130.4 L | DEF freezes below 12 °F (-11 °C); quality degrades rapidly above 140 °F (60 °C). Ideal storage 23–86 °F (-5–30 °C). Urea concentration must remain between 31.8–33.2%. John Deere DEF recommended; API or AdBlue certified DEF acceptable. DEF Tank Volume 34.4 gal (130.4 L); usable 28 gal (106 L). |
| Def | Aqueous Urea Solution 32 (AUS 32); 31.8–33.2% urea | ISO 22241-1; API Diesel Exhaust Fluid Certification Program or AdBlue Diesel Exhaust Fluid Certification | -11°C to 30°C | 130.4 L | DEF tank total 34.4 gal (130.4 L), usable 28 gal (106 L). Unit does not ship from factory with DEF in tank. DEF freezes below 12 °F (-11 °C); degrades rapidly above 140 °F (60 °C); ideal storage 23–86 °F (-5–30 °C). John Deere DEF recommended. |
| Def | Aqueous Urea Solution 32 (AUS 32) - John Deere DEF recommended | ISO 22241-1 | -5°C to 30°C | 34.4 gal | DEF tank total 34.4 gal (130.4 L); usable 28 gal (106 L). Urea concentration must remain 31.8-33.2%. Degrades above 140 °F (60 °C); freezes below 12 °F (-11 °C). Ideal storage 23-86 °F (-5-30 °C). Use API or AdBlue certified DEF if John Deere DEF unavailable. |
| Engine oil | John Deere Plus-50 II or John Deere Plus-50 (extended 500 hr interval); John Deere Torq-Gard Supreme, API CJ-4, API CI-4 PLUS, API CI-4, API CH-4, ACEA E9, ACEA E7, ACEA E6, ACEA E5, ACEA E4 | 32.5 L | Oil capacity including filter 8.6 gal (32.5 L); 500 hour extended oil and filter change interval only with John Deere Plus-50 II/Plus-50 oil and approved John Deere oil filter. Factory filled with break-in oil. | ||
| Engine oil | John Deere Plus-50 II, John Deere Plus-50, John Deere Torq-Gard Supreme | API CJ-4, API CI-4 PLUS, API CI-4, API CH-4, ACEA E9, ACEA E7, ACEA E6, ACEA E5, ACEA E4 | 8.6 gal | Oil including filter = 8.6 gal (32.5 L). 500 hour extended oil/filter change interval only with John Deere Plus-50 II or Plus-50 oil and an approved John Deere oil filter. Use high quality detergent oil with viscosity appropriate for ambient temperature. | |
| Engine oil | John Deere Plus-50, John Deere Plus-50 II, John Deere Torq-Gard Supreme, API CJ-4, API CI-4 PLUS, API CI-4, API CH-4, ACEA E9, ACEA E7, ACEA E6, ACEA E5, ACEA E4 | 32.5 L | Oil (including filter) capacity 8.6 gal (32.5 L). 500 hour extended drain interval only with extended drain oil pan, diesel sulfur content less than 2000 mg/kg, John Deere Plus-50 II or Plus-50 oil and approved John Deere oil filter. Factory filled with break-in oil. | ||
| Fuel | Ultra Low Sulfur Diesel | 358.0 gal | Standard fuel tank total 358 gal (1,355 L); usable 343 gal (1,297 L). Optional fuel tank total 529 gal (2,002 L); usable 513 gal (1,914 L). | ||
| Grease | High quality grease made specifically for lubrication of wheel bearings; automotive grease for jack internal gearing | Lubricate wheel bearings every 12 months or 12,000 miles (19,312 km); jack maintenance annually |
Extracted from the manufacturer documentation linked to this model. Values are copied as printed; confirm against your unit's manual and serial number.
⚠ Modifications of parameter values are immediately effective.
Tools: Torque wrench
Tools: Suitable container, Distilled water
⚠ Perform annually.
Tools: Grease gun, Needle-nose applicator
Tools: Grease gun, Needle nose applicator
⚠ Risk of poisoning. Do not ingest diesel exhaust fluid.
⚠ Immediately clean any surfaces with water that come in contact with diesel exhaust fluid.
⚠ If DEF is filled into engine fuel tank, do not operate engine until system is purged.
Tools: Lint free cloth, Polyethylene, polypropylene, or stainless steel containers
⚠ Do not create DEF by mixing agricultural grade urea with water.
Tools: JDG11594 Digital DEF Refractometer, JDG11684 DEF Refractometer
⚠ More frequent lubrication may be required under extremely dusty or damp conditions.
Tools: Standard grease gun, Clean cloth, High quality wheel bearing grease
Extracted from the manufacturer documentation linked to this model. Values are copied as printed; confirm against your unit's manual and serial number.
| Voltage | Phase | Connection | Leads | Notes |
|---|---|---|---|---|
| 3 | Cam lock panel / terminal lugs | L1 Black, L2 Red, L3 Blue, N White, G Green | NEUTRAL (L0) BONDED TO FRAME from factory; bonding plate must be removed when used as standby power source | |
| 120/208 | 3 | 120/208V 3-phase (Low Wye) | L1, L2, L3, N | L1-L2 = 208V, L2-L3 = 208V, L3-L1 = 208V; L1-N = 120V, L2-N = 120V, L3-N = 120V |
| 120/208V | 3 | Low wye (120/208V 3-phase) | T1,T2,T3,T4,T5,T6,T7,T8,T9,T10,T11,T12 | L1-L2 = 208V; L1-N = 120V; L2-L3 = 208V; L2-N = 120V; L3-L1 = 208V; L3-N = 120V |
| 120/208V | 3 | Low wye / Zig zag | T1, T2, T3, T4, T5, T6, T7, T8, T9, T10, T11, T12, N | L1-L2 = 208V, L2-L3 = 208V, L3-L1 = 208V; L1-N = 120V, L2-N = 120V, L3-N = 120V. |
| 120/240 | 1 | 120/240V 1-phase (Zig Zag) | L1, L3, N | L1-L3 = 240V; L1-N = 120V; L2-N = -------; L3-N = 120V |
| 120/240 | 3 | 120/240V 3-phase (optional 4th position on voltage selector switch) | L1, L2, L3, N | L1-L2 = 240V, L2-L3 = 240V, L3-L1 = 240V; L1-N = 120V, L2-N = 208V, L3-N = 120V |
| 120/240V | 1 | Single phase | T1, T2, T4, T5, T6, T8, T10, T11, T12, N | L1-L2 = 240V; L1-N = 120V. |
| 120/240V | 1 | Zig zag (120/240V 1-phase) | T1,T2,T3,T4,T5,T6,T7,T8,T9,T10,T11,T12 | L1-L3 = 240V; L1-N = 120V; L2-N = -------; L3-N = 120V |
| 120/240V | 3 | Delta (120/240V 3-phase, 4-position switch only) | T1,T2,T3,T4,T5,T6,T7,T8,T9,T10,T11,T12 | L1-L2 = 240V; L1-N = 120V; L2-L3 = 240V; L2-N = 208V; L3-L1 = 240V; L3-N = 120V |
| 120/240V | 3 | Delta (4-position switch) | T1, T2, T3, T4, T5, T6, T7, T8, T9, T10, T11, T12, N | L1-L2 = 240V, L1-N = 120V; L2-L3 = 240V, L2-N = 208V; L3-L1 = 240V, L3-N = 120V. |
| 208 | 3 | Voltage selector switch position label | Neutral (L0) bonded to frame when shipped from factory; bonding plate must be removed when used as standby power source | |
| 277/480 | 3 | 277/480V 3-phase (Hi Wye) | L1, L2, L3, N | L1-L2 = 480V, L2-L3 = 480V, L3-L1 = 480V; L1-N = 277V, L2-N = 277V, L3-N = 277V |
| 277/480V | 3 | Hi wye (277/480V 3-phase) | T1,T2,T3,T4,T5,T6,T7,T8,T9,T10,T11,T12 | L1-L2 = 480V; L1-N = 277V; L2-L3 = 480V; L2-N = 277V; L3-L1 = 480V; L3-N = 277V |
| 277/480V | 3 | Hi wye / Delta (4-position) | T1, T2, T3, T4, T5, T6, T7, T8, T9, T10, T11, T12, N | L1-L2 = 480V, L2-L3 = 480V, L3-L1 = 480V; L1-N = 277V, L2-N = 277V, L3-N = 277V. Neutral bonded to frame. |
| 480 | 3 | Voltage selector switch position label | Terminal lead colors: L1 Black, L2 Red, L3 Blue, N (Neutral) White, G (Ground) Green |
Extracted from the manufacturer documentation linked to this model. Values are copied as printed; confirm against your unit's manual and serial number.
| Part # | Description | Category |
|---|---|---|
| G030077 | Air Cleaner Element (Engine) Primary | air_filter |
| G030078 | Air Cleaner Element (Engine) Secondary | air_filter |
| GM90735 | Air Cleaner | air_filter |
| GM91358 | Element, Air Cleaner | air_filter |
| GM92823 | Element, Air Cleaner Safety | air_filter |
| MQ-125-AIR-FILTER | Air Filter | air_filter |
| DZ114956 | ALTERNATOR | alternator |
| DZ117503 | ALTERNATOR | alternator |
| DZ123153 | ALTERNATOR | alternator |
| LSA462M3 | Alternator | alternator |
| RE505895 | ALTERNATOR | alternator |
| RE506196 | ALTERNATOR | alternator |
| RE533516 | ALTERNATOR | alternator |
| RE533653 | ALTERNATOR | alternator |
| RE533654 | ALTERNATOR | alternator |
| RE537146 | (28V, 50A, ISKRA) (3142) | alternator |
| RE537507 | ALTERNATOR (12V, 90 A) (31AE) | alternator |
| RE537508 | ALTERNATOR | alternator |
| RE550906 | ALTERNATOR | alternator |
| RE555751 | ALTERNATOR | alternator |
| RE558675 | ALTERNATOR | alternator |
| RE558676 | ALTERNATOR | alternator |
| RE558678 | ALTERNATOR | alternator |
| RM100224 | ALTERNATOR (REMAN FOR RE505895) (12V, 75A) (3135) | alternator |
| SE501341 | (REMAN FOR AT161324, DZ114957) (3142) | alternator |
| SE502560 | (3164) | alternator |
| 8972824026 | Battery Acid charge Pb-Ca maintenance free, 24V - 1100 CCA | battery |
| MQ-125-BATTERY | Battery | battery |
| DZ114929 | FAN BELT | belt |
| DZ115455 | FAN BELT | belt |
| DZ115812 | FAN BELT (LGTH = 1680 mm) | belt |
| DZ117267 | FAN BELT (LGTH = 1690 mm) | belt |
| DZ117268 | FAN BELT (LGTH = 1530 mm) | belt |
| DZ118556 | FAN BELT | belt |
| DZ118557 | FAN BELT | belt |
| DZ118558 | FAN BELT | belt |
| DZ118559 | FAN BELT | belt |
| DZ118560 | FAN BELT | belt |
| DZ118561 | FAN BELT; LGTH = 1750 mm (24JX) | belt |
| DZ118764 | FAN BELT | belt |
| DZ118781 | FAN BELT (LGTH = 1700 mm) | belt |
| DZ118786 | (LGTH=1715 mm) (24GL) | belt |
| DZ118815 | FAN BELT (LGTH = 1725 mm) | belt |
| DZ119018 | FAN BELT | belt |
| DZ119059 | FAN BELT | belt |
| DZ119060 | FAN BELT (LGTH = 1555 mm) | belt |
| DZ119061 | FAN BELT (LGTH = 1540 mm) | belt |
| DZ119062 | FAN BELT | belt |
| DZ119063 | (LGTH=1563 mm) (24HC) | belt |
| DZ119416 | FAN BELT | belt |
| DZ119477 | FAN BELT (LGTH = 1565 mm) | belt |
| DZ119478 | FAN BELT (LGTH = 1570 mm) | belt |
| DZ119515 | FAN BELT | belt |
| DZ119516 | FAN BELT | belt |
| DZ119520 | FAN BELT | belt |
| DZ119521 | FAN BELT | belt |
| DZ119522 | FAN BELT | belt |
| DZ119530 | FAN BELT (LGTH = 1675 mm) | belt |
| DZ119531 | FAN BELT | belt |
| DZ119533 | FAN BELT | belt |
| DZ119715 | FAN BELT | belt |
| DZ121128 | FAN BELT; LGTH = 1725 mm (24JW) | belt |
| DZ121129 | FAN BELT | belt |
| DZ121133 | FAN BELT | belt |
| GM70424-1 | Fan Belt (12V) | belt |
| GM70424-2 | Fan Belt (24V) | belt |
| GM70798-1 | Fan Belt | belt |
| GM70798-2 | Fan Belt | belt |
| GM70798-3 | Fan Belt | belt |
| GM70798-4 | Fan Belt | belt |
| GM84749 | Fan Belt | belt |
| MQ-125-BELT | V-Belt | belt |
| R134625 | FAN BELT | belt |
| R500277 | FAN BELT | belt |
| R522890 | FAN PULLEY | belt |
| T282795 | FAN BELT | belt |
| T428692 | FAN BELT (LGTH = 1665 mm) | belt |
| T428724 | FAN BELT (LGTH = 1575 mm) | belt |
| T428725 | FAN BELT | belt |
| T428818 | FAN BELT | belt |
| T428820 | FAN BELT (LGTH = 1580 mm) | belt |
| T428822 | FAN BELT | belt |
| T428823 | FAN BELT | belt |
| T428825 | FAN BELT | belt |
| T428863 | FAN BELT | belt |
| VP64S17 | Pump Belt | belt |
| 011064 | Cold Weather Operation | cold_weather_operation |
| RM100100 | CONTROLLER | controller |
| RM100131 | CONTROLLER | controller |
| 362140-S | Main controller circuit board | controller_board |
| RE505939 | (1321) | crankshaft_pulley |
| MOOOOO-20001Q | Auto START/STOP Engine Controller (ECU) | ecm |
| RE520385 | Short Block Assembly (L-M-NL1066T, M99C2) | engine |
| 011134 | Engine exhaust | engine_exhaust |
| 5990101 | Power switching device (contactor) | exerciser_switch |
| DZ115392 | SECONDARY FILTER ELEMENT (35E6) | filter |
| MQ-125-FUEL-FILTER | Fuel Filter | filter |
| MQ-125-OIL-FILTER | Oil Filter | filter |
| G122208 | Clarke Eng Fluid - 5 gal | fluid |
| G122209 | Clarke Eng Fluid -1 gal | fluid |
| MQ-125-COOLANT | Coolant | fluid |
| MQ-125-OIL | Engine Oil | fluid |
| CO2775 | Element, Fuel Water Separator | fuel_filter |
| CO2776 | Element, Fuel Filter Primary | fuel_filter |
| DZ112918 | SECONDARY FUEL FILTER | fuel_filter |
| DZ122688 | SECONDARY FILTER ELEMENT (35E6) | fuel_filter |
| DZ128543 | PRIMARY FUEL FILTER | fuel_filter |
| GM32809 | Fuel Filter | fuel_filter |
| GM50006 | Fuel Filter | fuel_filter |
| GM50074 | Fuel Filter (primary) | fuel_filter |
| RE509031 | Filter Element | fuel_filter |
| RE509208 | Fuel Filter (Former # RE517181) | fuel_filter |
| RE520906 | PRIMARY FUEL FILTER | fuel_filter |
| RE541578 | CRANKSHAFT PULLEY AND DAMPER; OD = 190 mm (1343) | fuel_filter |
| RE60021 | FUEL FILTER | fuel_filter |
| RE62419 | FUEL FILTER | fuel_filter |
| DZ123559 | COMPLETE BLOCK ASSEMBLY INCLUDES CYLINDER HEAD WITH VALVES AND ROCKER ARM ASSEMBLY, COMPLETE GASKET KIT WITH FRONT AND REAR SEALS | gasket |
| 011135 | Generator box | generator_box |
| 10000037182 | Clamp, hose - spring type CTB-27ST | hose |
| 50332 | Hose, fuel .750 ID 35 PSI SAE 30R7 | hose |
| 60316 | Clamp, hose - SAE 032 (1.56-2.50) | hose |
| GM91647 | Hose, Hump | hose |
| 352793 | Oil Filter | oil_filter |
| C04521 | Element, Oil Filter | oil_filter |
| DZ118286 | OIL FILTER | oil_filter |
| GM64496 | Oil Filter | oil_filter |
| GM77161 | Oil Filter | oil_filter |
| GM86400 | Oil Filter | oil_filter |
| RE504836 | OIL FILTER | oil_filter |
| RE539279 | OIL FILTER (5970) (5975) | oil_filter |
| 011068 | Status: Generator at Rest, Stop Mode, 22:31 | other_service |
| 011136 | DANGER Electrocution. Do not disable or modify the connection box door safety switch. | other_service |
| 2x594 | Ampere rating | other_service |
| 46606373 | other_service | |
| 51551 | Decal set, safety | other_service |
| 51552 | Decal, high temp | other_service |
| 54005 | CAP, DEF FILL | other_service |
| 55104 | CAP, FUEL FILL 3.50 - GREEN | other_service |
| 6068HF120-183 | Engine | other_service |
| 9753300442 | Oil sample kit | other_service |
| DCA-125USJ | Battery Connections | other_service |
| DCA-150USJ | Battery Connections | other_service |
| DZ100304 | Diesel Exhaust Fluid Inline Filter | other_service |
| DZ105100 | CRANCKCASE VENT SYSTEM | other_service |
| DZ105796 | OCV FILTER | other_service |
| DZ109870 | SHORT BLOCK ASSEMBLY | other_service |
| DZ110282 | SHORT BLOCK ASSEMBLY | other_service |
| DZ110562 | Crankcase Vent System (USE WITH DZ113378 974G) | other_service |
| DZ110563 | TANK HEADER SUCTION SCREEN (974J) | other_service |
| DZ111004 | DEF TANK HEADER FILTER (25 Micron) | other_service |
| DZ111166 | (3402) (3404) (3408) (3409) (974G) | other_service |
| DZ113378 | TANK HEADER SUCTION SCREEN (974G) | other_service |
| DZ114641 | DIESEL EXHAUST FLUID INLINE-FILTER (3308) | other_service |
| DZ114642 | DIESEL EXHAUST FLUID INLINE-FILTER (3310) | other_service |
| DZ114643 | DIESEL EXHAUST FLUID INLINE-FILTER (3309) | other_service |
| DZ114644 | DIESEL EXHAUST FLUID INLINE-FILTER (3316) | other_service |
| DZ114645 | DIESEL EXHAUST FLUID INLINE-FILTER (3315) | other_service |
| DZ114646 | DIESEL EXHAUST FLUID INLINE-FILTER (3317) | other_service |
| DZ114647 | DIESEL EXHAUST FLUID INLINE-FILTER (3318) | other_service |
| DZ114695 | DEF TANK INLET SCREEN | other_service |
| DZ119883 | TORSIONAL DAMPER | other_service |
| G122191 | 250 hour Maintenance Kit (without fluids) | other_service |
| G122196 | 250 hour Maintenance Kit (& engine fluids) | other_service |
| G122201 | 500 hour Maintenance Kit (without fluids) | other_service |
| G122206 | 500 hour Maintenance Kit (& Engine fluids) | other_service |
| GM75552 | Block Heater Kit | other_service |
| GM75553 | Block Heater Kit | other_service |
| M2870400404 | Parts List No. | other_service |
| M2870400404C | other_service | |
| M3870400104 | other_service | |
| R113480 | FAN PULLEY | other_service |
| R128658 | FAN PULLEY | other_service |
| R128659 | FAN PULLEY | other_service |
| R128660 | FAN PULLEY | other_service |
| R128662 | FAN PULLEY | other_service |
| R133295 | CRANKSHAFT PULLEY (OD = 169 mm) | other_service |
| R133296 | CRANKSHAFT PULLEY & DAMPER | other_service |
| R545125 | CRANKSHAFT PULLEY (OD = 188 mm) | other_service |
| RE500013 | CRANKSHAFT PULLEY & DAMPER | other_service |
| RE505881 | (OD = 168 mm) (1324) | other_service |
| RE505940 | (6895) | other_service |
| RE505941 | CRANKSHAFT PULLEY & DAMPER (OD = 264 mm) (1322) | other_service |
| RE508578 | CRANKSHAFT PULLEY & DAMPER (OD = 264 mm) (1320) | other_service |
| RE528428 | CRANKSHAFT PULLEY & DAMPER (OD = 264 mm) (1340) | other_service |
| RE553703 | CRANCKCASE VENT SYSTEM (29AE) | other_service |
| RE571655 | Short Block Assembly | other_service |
| RE57604 | DAMPER | other_service |
| RE59355 | CRANKSHAFT PULLEY & DAMPER | other_service |
| SE501094 | CONNECTING ROD (REMAN FOR RE500608) (4838) | other_service |
| SE501581 | CYLINDER HEAD (REMAN FOR RE57489) (5107) | other_service |
| DZ114640 | DOSING UNIT PUMP FILTER | pump |
| SE501236 | FUEL INJECTION PUMP (REMAN FOR RE518088) (16L8, 16L9) | pump |
| SE501609 | (REMAN FOR RE546906) (4433) (4434) (4446) (4447) | pump |
| SE501814 | OIL PUMP (REMAN FOR DZ100057) (5001) | pump |
| SE502637 | WATER PUMP (REMAN FOR RE539093) (2052) | pump |
| MQ-125-SPARK-PLUG | Spark Plug | spark_plug |
| 2.03 | Starter motor rated | starter |
| 2.76 | Starter motor rated | starter |
| DZ110068 | Starter Motor (12V) | starter |
| DZ110083 | STARTER | starter |
| DZ129200 | STARTER | starter |
| RE501150 | STARTER | starter |
| RE501166 | STARTER | starter |
| RE515688 | STARTER | starter |
| RE523501 | (STARTER MOTOR KIT, KIT, STARTER ISK) (3073) | starter |
| RE523502 | STARTER | starter |
| RE540301 | STARTER (12 V, 2.5 KW) | starter |
| RE540302 | STARTER | starter |
| RE546868 | STARTER | starter |
| RE549229 | STARTER | starter |
| RE549230 | STARTER | starter |
| RE551637 | STARTER | starter |
| RE551644 | STARTER | starter |
| RE552251 | STARTER MOTOR (24V, 3.5KW) (30CA) | starter |
| RE564633 | STARTER | starter |
| RE64474 | STARTER | starter |
| RE65175 | STARTER | starter |
| RE65189 | STARTER | starter |
| RE70474 | STARTER | starter |
| RE70756 | STARTER (12 V) | starter |
| RE70957 | STARTER | starter |
| RE70960 | STARTER | starter |
| RE70961 | STARTER | starter |
| SE501401 | (REMAN FOR RE540301) (3005) | starter |
| SE502558 | (REMAN FOR RE549229) (12V) (30AT) | starter |
| SE502631 | (REMAN FOR RE523501) (12V, 4.2KW) (3073) | starter |
| SE502632 | STARTER | starter |
| SE502733 | STARTER | starter |
| SE502736 | STARTER | starter |
| SE502823 | STARTER | starter |
| SE502333 | TURBOCHARGER (REMAN FOR RE509435) (65EC) | turbocharger |
Parts cataloged across all variants of this engine family — verify the exact part fits your specific variant and serial number before ordering.
Parts listed by aftermarket suppliers as fitting this engine — leads compiled from supplier catalogs; verify the exact part for your serial number.
Other equipment known to use this engine, via filter-application cross-reference — useful for sourcing parts even when your exact machine isn't listed elsewhere on this page.
The John Deere 6068HFG06 engine has an oil capacity of 34.0 liters.
The John Deere 6068HFG06 has a displacement of 6.8 liters with 4 cylinders.
The John Deere 6068HFG06 powers 2 generator set(s), including Generac MDG250, Hipower HRJW-240 T4F.
A commonly reported issue on generators using the John Deere 6068HFG06 is: Shutdown indicator LED is illuminated.. Fix: Resolve by resolving shutdown condition..