The Deutz TD2.9 engine line groups 2 variant designations. Parts and fitment are pooled here so a cross-reference found on one variant surfaces for the whole family.
| Part # | Description | Category |
|---|---|---|
| S700162 | ef Valve | air_filter |
| K126-12 | KP1696-1 Drive Roll Kit - Includes: 2 V groove drive rolls and inner wire guide for Steel Wires. (Used on LN-25 Pro) Drive Roll and Guide Tube Kit For .068-.072 in. (1.7-1.8 mm) cored or solid steel wire. | other_service |
| K1478-5 | other_service | |
| K1797-xx | CABLE | other_service |
| K1816-1 | Full KVA Adapter Kit - Plugs into the 120/240V NEMA 14-50R receptacle on the case front (which accepts 4-prong plugs) and converts it to a NEMA 6-50R receptacle (which accepts 3-prong plugs) for connection to Lincoln Equipment with a NEMA 6-50P plug | other_service |
| K2614-9 | K126™PRO Innershield® Gun For self-shielded wire with 15 ft. (4.5 m) cable. For .062-5/64 in. (1.6-2.0 mm) wire. Includes K466-10 Connector Kit. | other_service |
| K2636-1 | other_service | |
| K2639-1 | FENDER & LIGHT KIT | other_service |
| K2640-1 | CABLE STORAGE RACK | other_service |
| K2641-2 | FOUR WHEELED STEERABLE YARD TRAILER For in plant and yard towing. Comes standard with a Duo-Hitch™, a 2” Ball and Lunette Eye combination hitch. | other_service |
| K2642-1 | other_service | |
| K2808-1 | AIR VANTAGE® 600 SD C-3 NOTES AIR VANTAGE® 600 SD C-4 NOTES AIR VANTAGE® 600 SD D-1 MAINTENANCE | other_service |
| K3985-1 | SPARK ARRESTOR KIT - Easily mounts to D.O.C. unit in place of the exhaust outlet pipe. | other_service |
| K487-25 | K2652-2-10-45 K487-25 Magnum SG Spool Gun Hand held semiautomatic wire feeder. Requires SG Control Module and Input Cable. | other_service |
| K488 | SG Control Module The Interface between the power source and the spool gun. Provides control of the wire speed and gas flow. For use with a spool gun. | other_service |
| K691-10 | Input Cable (For SG Control Module) For Lincoln engine power sources with 14-pin MS-type connection, separate 115V NEMA receptacles and output stud connections. | other_service |
| K704 | ACCESSORY SET - Includes 35 feet (10 m) of electrode cable and 30ft. (9m) of work cable, headshield, Filter plate, work clamp and electrode holder. Cable is rated at 500 amps, 60% duty cycle. | other_service |
| K802N | POWER PLUG KIT - Provides four 120V plugs rated at 20 amps each and one dual voltage, full KVA plug rated at 120/240V, 50 amps. 120V plug may not be compatible with NEMA common household receptacles. | other_service |
| K857 | 25 ft. (7.5 m) or K857-1 100 ft. (30.4 m) REMOTE CONTROL - Portable control provides same dial range as the output control on the welder from a location up to the specified length from the welder. Has convenient plug for easy connection to the welder. The AIR VANTAGE® 600 SD is equipped with a 12-pin connector for connecting the remote control and 12-pin to 6-pin adapter. | other_service |
| T12153-9 | Full-KVA Power Plug - One dual voltage plug rated at 120/240V, 50 amps, single phase. | other_service |
Parts cataloged across all variants of this engine family — verify the exact part fits your specific variant and serial number before ordering.
Leads compiled from supplier catalogs across the family’s variants; verify the exact part for your variant and serial number.