HomeEnginesCummins/Onan GTA14-G2

Cummins/Onan GTA14-G2 Engine

The Cummins/Onan GTA14-G2 is a 14 L 6-cylinder turbocharged & aftercooled engine rated at 1500 rpm, producing up to 366 kW. It powers generator sets from Cummins/Onan, including the GFDA.

Also known as: Cummins GTA14-G2

Part of the Cummins/Onan GTA14 engine family — 3 variants share parts & fitment.

14.0 L
Displacement
6
Cylinders
1500 rpm
Rated speed
366 kW
Gross power

Engine specifications

Displacement14.0 L
Cylinders6
AspirationTurbocharged & Aftercooled
Rated speed1500 rpm
Gross power366 kW

Generator sets powered by this engine

1
Cummins/Onan GFDA

How to read your Cummins/Onan engine serial & model number →

Maintenance schedule

ItemSpecCapacityPart #Interval
Air filter
Fuel filter
Oil filter
Battery
Belt
Coolant
Oil
Spark plug

Pooled from every document that names this exact engine — confirm the interval and part number against your unit's serial number.

Service specifications

31
TypeItemValueUnitCondition
OtherCold cranking amperes (CCA) - engine only (de-clutched load)900CCA
OtherReserve capacity - engine only (de-clutched load)320min.
PressureMaximum allowable exhaust back pressure2 (50)in. Hg. (mm Hg)
PressureMaximum allowable intake air restriction with heavy duty air cleaner - clean element8 (203)in. H2O (mm H2O)clean element
PressureMaximum allowable intake air restriction with heavy duty air cleaner - dirty element15 (381)in. H2O (mm H2O)dirty element
PressureMaximum coolant friction head external to the engine5 (34)PSI (kPa)
PressureMaximum running pressure to carburetor (after regulation)6 (152)in. H2O (mm H2O)
PressureMaximum running pressure to engine mounted regulator20 (508)in. H2O (mm H2O)
PressureMinimum allowable pressure cap7 (48)PSI (kPa)
PressureMinimum running pressure to engine mounted regulator10 (254)in. H2O (mm H2O)
PressureOil pressure at idle (minimum allowable)15 (103)PSI (kPa)idle
PressureOil pressure at rated speed (minimum allowable)35 – 45 (241 – 310)PSI (kPa)rated speed
PressureSAE J1349 test condition: barometric pressure29.61in. Hg100 kPa; 300 ft (91 m) altitude
PressureSAE J1349 test condition: water pressure0.30in. Hg1 kPa
ResistanceMaximum allowable resistance of starting circuit002Ohms
SpeedLow idle speed900RPM
SpeedMaximum no-load governed speed1980RPM
SpeedMaximum overspeed capability2100RPM
SpeedMaximum rated speed1800RPM
SpeedMinimum cranking speed150RPM
TemperatureMaximum allowable oil temperature230 (110)°F (°C)
TemperatureMaximum allowable top tank temperature200 (93)°F (°C)
TemperatureMaximum turbine inlet temp (dry manifold)1300 (704)°F (°C)
TemperatureMinimum recommended top tank temperature160 (71)°F (°C)
TemperatureRating note (1): water temperature to aftercooler, or use of air-to-air aftercooler with 100 F or lower air temperature to the radiator32C (90 F)applies to 10.5:1 / 10:1 / 11:1 note-(1) ratings
TemperatureRating note (2): water temperature to aftercooler, or use of air-to-air aftercooler with 130 F or lower air temperature to the radiator54C (130 F)applies to 8.5:1 note-(2) ratings
TemperatureRating note (3): water temperature to aftercooler, or use of air-to-air aftercooler with 110 F or lower air temperature to the radiator32C (90 F)applies to 10.5:1 note-(3) ratings
TemperatureRating note (4): water temperature to aftercooler, or use of air-to-air aftercooler with 130 F or lower air temperature to the radiator54C (130 F)applies to 8.5:1 note-(4) ratings
TemperatureSAE J1349 test condition: inlet air temperature77F25 C
TemperatureStandard thermostat (modulating) range175 – 195 (79 – 91)°F (°C)
VoltageMinimum recommended battery capacity (cold soak 0° F / -18° C or above)24Volt

Extracted from the manufacturer documentation linked to this model. Values are copied as printed; confirm against your unit's manual and serial number.

Recommended fluids

FluidGradeStandardAmbientCapacityNotes
Engine oilMulti-viscosity or straight weight single viscosity NATURAL GAS ENGINE OILMil-2104A (CB), Mil-2104B (CC), Mil-2104C (CD/SC), CE and CF-441.7 litreTotal system capacity including by-pass filter 11 U.S. gal (41.7 L); oil pan capacity high/low 9.5 – 8.0 U.S. gal (36.0 – 30.3 L). Refer to CNGE Service Parts Topic SPT97-10.
FuelDry processed pipe line quality natural gasFuel temperature 60 deg F +/- 9 at Flow Transmitter; Fuel pressure 14.73 PSIA +/- .5 PSIA at Flow Transmitter
FuelDry processed natural gas905 BTU per standard cubic foot (33.72 kJ/l) lower heating value
Fueldry processed natural gas905 BTU per standard cubic foot (33.72 kJ/l) lower heating value, used for the tabulated ratings; deration may be required due to altitude, temperature, type of fuel or use of a catalytic converter

Extracted from the manufacturer documentation linked to this model. Values are copied as printed; confirm against your unit's manual and serial number.

Parts cataloged across the Cummins/Onan GTA14 family

6
Part #DescriptionCategory
3822524Use on v-belts ( 3/8 to 7/8) and v-ribbed belts with 5 ribs or less.belt
3822525Use on v-beits larger than 7/8 in. and v-ribbed belts with 6 or more ribs.belt
LF750Bypass Filter, 750 in3bypass_filter
LF3000Lube, Spin-Onoil_filter
3376592Inch Pound Torque Wrenchother_service
7-19Spark PLUGspark_plug

Parts cataloged across all variants of this engine family — verify the exact part fits your specific variant and serial number before ordering.

Common questions

What is the displacement of the Cummins/Onan GTA14-G2?

The Cummins/Onan GTA14-G2 has a displacement of 14.0 liters with 6 cylinders.

Which generators use the Cummins/Onan GTA14-G2 engine?

The Cummins/Onan GTA14-G2 powers 1 generator set(s), including Cummins/Onan GFDA.