HomeEnginesCummins/Onan VTA1710

Cummins/Onan VTA1710 Engine Engine

The Cummins/Onan VTA1710 is a 28.03 L 12-cylinder n/a engine rated at 1800 rpm. It powers generator sets from Cummins/Onan, including the DFV Series.

Also known as: Cummins VTA1710

28.03 L
Displacement
12
Cylinders
1800 rpm
Rated speed

Engine specifications

Displacement28.03 L
Cylinders12
AspirationN/A
Rated speed1800 rpm

Generator sets powered by this engine

1
Cummins/Onan DFV Series

Common problems

2
  • NOISY ALTERNATOR
    Cause: Worn or defective brushes.
    Fix: Replace brushes.
  • ALTERNATOR FAILS TO CHARGE OR PUTS OUT LOW OR.UNSTEADY CHARGE RATE
    Cause: Faulty regulator.
    Fix: Replace regulator.

Compiled from service & troubleshooting documentation across every generator set that uses the Cummins/Onan VTA1710.

Maintenance schedule

ItemSpecCapacityPart #Interval
Air filterDry type1250 hr find
Fuel filterN/A1250 hr find
Oil filterN/A1250 hr find
BeltN/A1250 hr find
CoolantN/A3750 hr
Oil10W-3013.0 gallons500 hr

Pooled from every document that names this exact engine — confirm the interval and part number against your unit's serial number.

Aftermarket parts that fit this engine

5
4084748 PartsGeek 3801024 PartsGeek 195500 PartsGeek VT28 PartsGeek VTA1710 PartsGeek

Parts listed by aftermarket suppliers as fitting this engine — leads compiled from supplier catalogs; verify the exact part for your serial number.

Common questions

What is the displacement of the Cummins/Onan VTA1710?

The Cummins/Onan VTA1710 has a displacement of 28.03 liters with 12 cylinders.

Which generators use the Cummins/Onan VTA1710 engine?

The Cummins/Onan VTA1710 powers 1 generator set(s), including Cummins/Onan DFV Series.

How often should you change the oil in the Cummins/Onan VTA1710?

The Cummins/Onan VTA1710 oil change interval is every 500 hours.

What is a common problem with the Cummins/Onan VTA1710 engine?

A commonly reported issue on generators using the Cummins/Onan VTA1710 is: NOISY ALTERNATOR. Cause: Worn or defective brushes.. Fix: Replace brushes..