Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Engines›Lugger L498

Lugger L498 Engine Engine

The Lugger L498 is a 3.32 L 4-cylinder naturally aspirated engine rated at 1800 rpm, producing up to 36.54 kW. It powers generator sets from Northern Lights, including the NL498D2.

Also known as: Lugger L498

3.32 L
Displacement
4
Cylinders
1800 rpm
Rated speed
36 kW
Gross power

Engine specifications

Displacement3.32 L
Cylinders4
Aspirationnaturally aspirated
Rated speed1800 rpm
Gross power36 kW

Generator sets powered by this engine

1
Northern Lights NL498D2

Common problems

1
  • Temperature gauge shows temperature within normal temperature range
    Fix: Check the engine crankcase oil level. If the oil level is low, fill with recommended lubricating oil and restart. Watch the oil pressure gauge carefully and shut off the engine if it does not show a normal reading (20-60 PSI) after a few seconds of operation. If the oil level is normal, DO NOT restart the engine. Call your dealer for assistance.

Compiled from service & troubleshooting documentation across every generator set that uses the Lugger L498.

Common questions

What is the displacement of the Lugger L498?

The Lugger L498 has a displacement of 3.32 liters with 4 cylinders.

Which generators use the Lugger L498 engine?

The Lugger L498 powers 1 generator set(s), including Northern Lights NL498D2.

What is a common problem with the Lugger L498 engine?

A commonly reported issue on generators using the Lugger L498 is: Temperature gauge shows temperature within normal temperature range. Fix: Check the engine crankcase oil level. If the oil level is low, fill with recommended lubricating oil and restart. Watch the oil pressure gauge carefully and shut off the engine if it does not show a normal reading (20-60 PSI) after a few seconds of operation. If the oil level is normal, DO NOT restart the engine. Call your dealer for assistance..