The Perkins 4006-23TAG2A is a 22.92 L 6-cylinder turbocharged and air-to-air charge cooled engine rated at 1500 rpm, producing up to 759 kW. It powers generator sets from FG Wilson, Perkins and Simson-Maxwell, including the P730P1, P730P1 - P800E1, P800E1 and 4006-23 TAG2A. It holds 122.7 L (32.4 gal) of oil and 156 L (41.2 gal) of coolant.
Also known as: Perkins 4006-23TAG2A, 4006-23TAG2A
Part of the Perkins 4006 engine family — 11 variants share parts & fitment.
| Oil capacity | 122.7 L |
|---|---|
| Coolant capacity | 156.0 L |
| Displacement | 22.921 L |
| Cylinders | 6 |
| Aspiration | Turbocharged and air-to-air charge cooled |
| Rated speed | 1500 rpm |
| Gross power | 759 kW |
Shared across brands: FG Wilson, Perkins, Simson-Maxwell
| Part # | Description | Category |
|---|---|---|
| D1053/1 | feeler gauge (D2) | air_filter |
| 21820116 | POWERPART Gasket remover | gasket |
| 21820518 | POWERPART Gasket and flange sealant | gasket |
| 1734115 | POWERPART Lay-Up 3 (Outside metal parts protection) | other_service |
| 1762811 | POWERPART Lay-Up 2 (Engine and closed system protection) | other_service |
| 1772204 | POWERPART Lay-Up 1 (Diesel fuel additive) | other_service |
| 1861108 | POWERPART Silicone adhesive (RTV) | other_service |
| 21820121 | POWERPART Hydraulic threadseal | other_service |
| 21820122 | POWERPART Pipe sealant and sealant primer | other_service |
| 21820125 | POWERPART Industrial grade super glue | other_service |
| 21820126 | POWERPART Metal repair putty | other_service |
| 21820127 | POWERPART Radiator stop leak | other_service |
| 21820128 | POWERPART Safety cleaner | other_service |
| 21820129 | POWERPART Griptite | other_service |
| 21820130 | POWERPART Thread sealant | other_service |
| 21820181 | POWERPART ELC (Extended Life Coolant) | other_service |
| 21820608 | POWERPART Retainer (oil tolerant) | other_service |
| 21820638 | POWERPART Retainer (high strength) | other_service |
| 21825001 | POWERPART Easy flush | other_service |
| 21826038 | POWERPART Silicone adhesive (RTV) | other_service |
| D1001 | Viton seals | other_service |
| D1050/1 | wing nut (A1) | other_service |
| D1056/1 | lock nut (C2) | other_service |
| D1057/1 | adjuster screw (C3) | other_service |
| D1355A | Joint | other_service |
| g01371640 | Pressurized system! Hot coolant can cause serious burns, injury or death. To open the cooling system filler cap, stop the engine and wait until the cooling system components are cool. Loosen the cooling system pressure cap slowly in order to relieve the pressure. Read and understand the Operation and Maintenance Manual before performing any cooling system maintenance. | other_service |
| g01372254 | Ether warning label | other_service |
| g01372256 | Hot fluid under pressure label | other_service |
| g01393287 | Fall Hazard (7) | other_service |
| g02781437 | Rotating shaft hand crush hazard label | other_service |
| g06019365 | Universal warning label | other_service |
| g06086932 | Do not step label | other_service |
| g06093786 | Hot surface label | other_service |
| i06521698 | Fluid Recommendations (Fuel Specifications) | other_service |
| i06712726 | Universal warning label | other_service |
Parts cataloged across all variants of this engine family — verify the exact part fits your specific variant and serial number before ordering.
The Perkins 4006-23TAG2A engine has an oil capacity of 122.7 liters.
The Perkins 4006-23TAG2A has a displacement of 22.921 liters with 6 cylinders.
The Perkins 4006-23TAG2A powers 5 generator set(s), including FG Wilson P730P1, FG Wilson P730P1 - P800E1, FG Wilson P800E1, Perkins 4006-23 TAG2A, Simson-Maxwell SPW660.