The Hatz 1B50 is a 0.52 L 1-cylinder air-cooled engine rated at 3000 rpm. It powers generator sets from Hatz Diesel. It holds 3.2 L (0.8 gal) of oil.
| Oil capacity | 3.2 L |
|---|---|
| Displacement | 0.517 L |
| Cylinders | 1 |
| Aspiration | Air-cooled |
| Rated speed | 3000 rpm |
| Code | Meaning | Remedy |
|---|---|---|
| Engine fault | This indicator lights up or flashes if there are engine faults. For details on troubleshooting measures, see 9.2 Flash code table for engine faults, page 80. | |
| Oil pressure indicator | Engine oil pressure too low. Danger of engine damage. Stop the engine immediately and check the oil level (see chapter 7.5 Check the oil level, page 45). Contact the HATZ service if the oil level is correct. | Stop the engine immediately and check the oil level (see chapter 7.5 Check the oil level, page 45). Contact the HATZ service if the oil level is correct. |
| Engine temperature indicator | Engine temperature is impermissibly high. Danger of engine damage. Switch off the engine immediately! | Switch off the engine immediately! |
Fault codes and symptom→remedy steps extracted from this engine’s service/owner documentation; verify against the official manual before servicing.
Parts listed by aftermarket suppliers as fitting this engine — leads compiled from supplier catalogs; verify the exact part for your serial number.
The Hatz 1B50 engine has an oil capacity of 3.2 liters.
The Hatz 1B50 has a displacement of 0.517 liters with 1 cylinders.
The Hatz 1B50 powers 1 generator set(s), including Hatz Diesel 1B50.