The Continental M330 is a 6-cylinder gasoline burning engine rated at 1800 rpm. It powers generator sets from Continental. It holds 0.5 L (0.1 gal) of oil and 32 L (8.5 gal) of coolant.
Also known as: Continental M330
| Oil capacity | 0.5 L |
|---|---|
| Coolant capacity | 32.0 L |
| Cylinders | 6 |
| Aspiration | Gasoline burning |
| Rated speed | 1800 rpm |
| Item | Spec | Capacity | Part # | Interval | |
|---|---|---|---|---|---|
| Air filter | Check every two hundred miles (3 to 5 hours running time) and change every 1000 to 1500 miles (28 to 42 hours) | — | 200 hr | find | |
| Fuel filter | Change every 1000 to 1500 miles (28 to 42 hours) | — | 1000 hr | find | |
| Oil filter | F140L330 | 25 hr | PartsGeek $13.97 | ||
| Belt | Not specified | — | 50 hr | find | |
| Coolant | Check every 6 to 8 running hours (250 to 350 miles) and change every 50 to 100 operating hours (2000 to 4000 miles) | 32.0 l | — | 6 hr | |
| Coolant filter | — | find | |||
| Hydraulic filter | — | find | |||
| Oil | Change every 50 to 100 operating hours (2000 to 4000 miles) | 7.0 l | — | 50 hr |
Pooled from every document that names this exact engine — confirm the interval and part number against your unit's serial number.
Cross-referenced via Donaldson + OEM/engine-maker interchange — options to verify against your serial number, not confirmed for every exact variant.
Other equipment known to use this engine, via filter-application cross-reference — useful for sourcing parts even when your exact machine isn't listed elsewhere on this page.
The Continental M330 engine has an oil capacity of 0.5 liters.
The Continental M330 powers 1 generator set(s), including Continental M330.
The Continental M330 uses oil filter part numbers Continental F140L330, Donaldson P550203, Wix 51010.
The Continental M330 oil change interval is every 50 hours.