HomeEnginesMitsubishi S4L2-W461ML/4LE1-PV05

Mitsubishi S4L2-W461ML/4LE1-PV05 Engine Engine

The Mitsubishi S4L2-W461ML/4LE1-PV05 is a 1.76 L 4-cylinder liquid cooled, 4-stroke engine rated at 1800 rpm, producing up to 31.5 kW. It powers generator sets from Magnum, including the LR 114630-1.

Also known as: Mitsubishi/Isuzu S4L2-W461ML/4LE1-PV05

Part of the Mitsubishi S4L2 engine family — 8 variants share parts & fitment.

1.76 L
Displacement
4
Cylinders
1800 rpm
Rated speed
31 kW
Gross power

Engine specifications

Displacement1.76 L
Cylinders4
Aspirationliquid cooled, 4-stroke
Rated speed1800 rpm
Gross power31 kW

Generator sets powered by this engine

1
Magnum LR 114630-1

Common problems

1
  • Mast lights off but ballast indicators on control panel are on
    Cause: Mast light is too hot. Allow light to cool 10-15 minutes before restarting. Faulty bulb connection. Check that the bulb is tight in the socket.

Compiled from service & troubleshooting documentation across every generator set that uses the Mitsubishi S4L2-W461ML/4LE1-PV05.

Maintenance schedule

ItemSpecCapacityPart #Interval
Air filterClean Air Filter Element, replace if necessary find
Fuel filterChange the engine oil and filter after the first 50 hours of operation, then every 250 hours.260 hr find
Oil filterChange the engine oil and filter after the first 50 hours of operation, then every 250 hours.30A4000103260 hr PartsGeek FridayParts $13.99
BeltCheck Alternator Belt, Replace Alternator Belt find
CoolantChange Engine Coolant2400 hr
OilDrain the fuel filter daily in rainy or humid conditions.

Pooled from every document that names this exact engine — confirm the interval and part number against your unit's serial number.

Parts cataloged across the Mitsubishi S4L2 family

61
Part #DescriptionCategory
00149MAIN BREAKERair_filter
010005Air filter, Control box, Radiator, Document holder, Coolant overflow jug, Battery (behind panel), Starter (below muffler—on engine), Oil level indicator (dipstick), Muffler, Fuel filterair_filter
042418Dinse-Style Connector 50 mm (1 male)cable_connector
191981Tweco®-Style Connector Accepts #1/0 to #2/0 AWG cable. Kit includes one male Tweco-style plug which attaches to the work and/or weld cables and plugs into the Tweco-style receptacles on the power source.cable_connector
210061Tweco®/Dinse Adapter One-piece adapter with a male Tweco-style plug (to power source) on one end and a female Dinse-style receptacle (for weld cable connection) on other end.cable_connector
301611Universal Connector Kits Tweco®-style receptacles 301595 Dinse-style receptacles Includes receptacles, wrench and electrical joint compound.cable_connector
00230Prestart Checklistemergency_stop_switch
043947FA-1D Lockable Flame Arrestor Fuel Cap Fuel cap can be padlocked to prevent vandalism. A built-in flame arrestor prevents flames or sparks from entering the fuel tank.fa_1d_lockable_flame_arrestor_fuel_cap_fuel_cap_can_be_padlocked_to_prevent_vandalism_a_built_in_flame_arrestor_prevents_flames_or_sparks_from_entering_the_fuel_tank
300585FA-1D Lockable Flame Arrestor Fuel Capfuel_filter
00203GLOW PLUGglow_plug
00243Greasegrease
010056Main circuit breaker, Engine ignition switch (key activated), Circuit breaker indicator light, Engine hours metermain_circuit_breaker
00175Mast Junction Box and Light Connectionsmast_light_connections
252782Engine Filter Kit Includes all filters required for proper engine maintenance. Oil filter, primary and secondary fuel filter, and primary air filter.oil_filter
010054Operator’s manual must be stored on machineoperator_manual
000139ADVERTENCIA Riesgo de quemaduras. Espere a que el motor se enfríe antes de vaciar el aceite o el refrigerante. No hacerlo puede ocasionar la muerte o lesiones graves.other_service
000187AVERTISSEMENT Décharge électrique. Des tensions potentiellement mortelles sont générées par cet appareil. Assurez-vous que l’appareil est sécuritaire avant de le réparer ou d’en effectuer l’entretien. Le non-respect de cette consigne pourrait entraîner la mort ou des blessures graves.other_service
000278WARNINGother_service
00112Component Locationsother_service
00124MLT5150MV • MLT5200IV • MLT5200IVCANother_service
00159Light Tower Set Upother_service
00167Main Control Panelother_service
00186Raising the Mastother_service
00201ENGINE START SWITCHother_service
00202Starting the Unitother_service
00216Unit ID Tagother_service
00227VIN Tagother_service
002306Trailer Wheel Bearing Grease Zerk Fittingother_service
003983Breakers Located Behind The Panelother_service
004505Control Panelother_service
004550WARNING: Burn hazard. Lamps become extremely hot while in use. Allow 10–15 minutes for cooling before handling or lowering mast. Touching a hot lens or fixture can cause severe burns.other_service
004558Winch Assemblyother_service
004621Unit ID Tagother_service
004622Component Locationsother_service
004625Control Panelother_service
010052other_service
042419SCREW RHM 10-32 X 4other_service
043688RCCS-14 North/south fingertip controlother_service
11275Decal, Magnum logo w/ web - red vinylother_service
1191721-phase, 120/240 V, 50 A plug (NEMA 14-50P) to fit full KVA receptacle.other_service
12141Decal set, LT eng/safety 4-langother_service
12262Decal, 4000/5000 set up 4-lang (MW)other_service
12880Decal, instruction 4000/5000 4-lang (EW)other_service
151086RCC-14 Side-to-side (east/west) fingertip controlother_service
194744RFCS-14 HD Heavy-duty foot controlother_service
195196No. 2 Stick Cable Setother_service
195301Blue water-resistant cover with Miller logo resists stains and mildew, and protects the finish of your welder.other_service
209649Form: SFC626Bother_service
242211020RHC-14 Hand Controlother_service
301582Wireless Remote Controls Wireless Remote Hand Control For remote current, voltage and contactor control. Receiver plugs directly into the 14-pin receptacle of Miller machine. Up to 300-foot (91.4 m) operating range.other_service
907529Spectrum® 375 X-TREME™ See literature PC/9.2plasma_cutter
907579Spectrum® 625 X-TREME™ with 12-foot (3.7 m) torch See literature PC/9.6plasma_cutter
907579001Spectrum® 625 X-TREME™ with 20-foot (6.1 m) torch See literature PC/9.6plasma_cutter
195511PRHC-14 Hand Control* Complete current control brings 120 volts of GFCI power to work area in a single cord. Housed in a durable and light aluminum case and includes 125-foot (38 m) cord with plugs.remote_control
301580Wireless Remote Controls Wireless Remote Foot Control For remote current and contactor control. Receiver plugs directly into the 14-pin receptacle of Miller machine. 90-foot (27.4 m) operating range.remote_control
00233GLOW PLUGspark_plug
300836No. 2 Stick Cable Set, 50 ft. (15 m) Consists of 50-foot (15 m) No. 2 electrode cable with holder, and 50-foot (15 m) work cable with clamp. 200 A, 100% duty cycle.stick_cable
0439522/0 Stick Cable Set, 100/50 ft. (30.5/15 m) Consists of 100-foot (30.5 m) 2/0 electrode cable with holder, and 50-foot (15 m) work cable with clamp. 300 A, 100% duty cycle.stick_cable_set
1738512/0 Stick Cable Set, 50 ft. (15 m) Consists of 50-foot (15 m) 2/0 electrode cable with holder, and 50-foot (15 m) work cable with clamp. 350 A, 100% duty cycle.stick_cable_set
009708Unit ID tag, Vehicle Identification Number (VIN) tagunit_id_tag
010053Warning: Hot surface, moving partswarning_label

Parts cataloged across all variants of this engine family — verify the exact part fits your specific variant and serial number before ordering.

Filters for this engine

  • Air filter: Mitsubishi MD623028 Mitsubishi 91B6100800 Donaldson P821575 Donaldson P822858 Wix 46438NP Wix 42985
  • Fuel filter: Donaldson P550345 Ac Delco XD32
  • Oil filter: Mitsubishi 30A4000103 Donaldson P502007 Wix 51356 Ac Delco AC028

Cross-referenced via Donaldson + OEM/engine-maker interchange — options to verify against your serial number, not confirmed for every exact variant.

Also used in

4
  • Caterpillar 303.5 — Excavator Tracked
  • Terex HR14 — Excavator Compact
  • Terex HR16 — Excavator Compact
  • Volvo Construction Equipment EC35 — Excavator Tracked

Other equipment known to use this engine, via filter-application cross-reference — useful for sourcing parts even when your exact machine isn't listed elsewhere on this page.

Common questions

What is the displacement of the Mitsubishi S4L2-W461ML/4LE1-PV05?

The Mitsubishi S4L2-W461ML/4LE1-PV05 has a displacement of 1.76 liters with 4 cylinders.

Which generators use the Mitsubishi S4L2-W461ML/4LE1-PV05 engine?

The Mitsubishi S4L2-W461ML/4LE1-PV05 powers 1 generator set(s), including Magnum LR 114630-1.

What oil filter does the Mitsubishi S4L2-W461ML/4LE1-PV05 use?

The Mitsubishi S4L2-W461ML/4LE1-PV05 uses oil filter part numbers Mitsubishi 30A4000103, Donaldson P502007, Wix 51356.

What fuel filter does the Mitsubishi S4L2-W461ML/4LE1-PV05 use?

The Mitsubishi S4L2-W461ML/4LE1-PV05 uses fuel filter part numbers Donaldson P550345, Ac Delco XD32.

What air filter does the Mitsubishi S4L2-W461ML/4LE1-PV05 use?

The Mitsubishi S4L2-W461ML/4LE1-PV05 uses air filter part numbers Mitsubishi MD623028, Mitsubishi 91B6100800, Donaldson P821575.

What is a common problem with the Mitsubishi S4L2-W461ML/4LE1-PV05 engine?

A commonly reported issue on generators using the Mitsubishi S4L2-W461ML/4LE1-PV05 is: Mast lights off but ballast indicators on control panel are on. Cause: Mast light is too hot. Allow light to cool 10-15 minutes before restarting. Faulty bulb connection. Check that the bulb is tight in the socket..