KEM Equipment and GM Powertrain 4.3L Engine Engine
The KEM Equipment and GM Powertrain 4.3L is a 0.26 L 6-cylinder n/a engine. It powers generator sets from KEM Equipment and GM Powertrain, including the 4.3L/262. It holds 4.5 L (1.2 gal) of oil.
Also known as: KEM Equipment and GM Powertrain 4.3L
Engine specifications
| Oil capacity | 4.5 L |
|---|
| Displacement | 0.262 L |
|---|
| Cylinders | 6 |
|---|
| Aspiration | N/A |
|---|
Generator sets powered by this engine
1KEM Equipment and GM Powertrain 4.3L/262
Common problems
5- Overheating
Fix: Stop the engine under normal conditions; stop the engine in abnormal conditions (overheating) - Engine does not start
Fix: Clear flood, cold start - Engine Does Not Crank
Fix: Check battery cables – adjust any loose connections and clean any corrosion. Check battery charge. Check electrical leads – something may be loose or disconnected. Check all fuses and relays. Refer to Pre-Operational checklist for further checks. - Check Gauges light is illuminated
Fix: Check oil pressure and coolant temperature immediately. There are safeties in the calibration that will reduce engine speed if the sensor output is out of the normal range (low oil pressure when the engine is at rated speed for instance). If the engine should turn off for no apparent reason, check this lamp. - Check Engine Light is illuminated
Cause: A fault exists that is related to the engine's control system. Some of the components that can cause problems are: crank sensor, cam sensor, fuel injectors, regulators, ignition system and Manifold Air Pressure (MAP) sensor.
Fix: Stop operation of engine as soon as safely possible. Request that a technician inspect the fault code setting. He or she will connect a scan tool to determine the cause of the MIL illuminating, repair the problem, and clear the codes.
Compiled from service & troubleshooting documentation across every generator set that uses the KEM Equipment and GM Powertrain 4.3L.
Common questions
What is the oil capacity of the KEM Equipment and GM Powertrain 4.3L?
The KEM Equipment and GM Powertrain 4.3L engine has an oil capacity of 4.5 liters.
What is the displacement of the KEM Equipment and GM Powertrain 4.3L?
The KEM Equipment and GM Powertrain 4.3L has a displacement of 0.262 liters with 6 cylinders.
Which generators use the KEM Equipment and GM Powertrain 4.3L engine?
The KEM Equipment and GM Powertrain 4.3L powers 1 generator set(s), including KEM Equipment and GM Powertrain 4.3L/262.
What is a common problem with the KEM Equipment and GM Powertrain 4.3L engine?
A commonly reported issue on generators using the KEM Equipment and GM Powertrain 4.3L is: Overheating. Fix: Stop the engine under normal conditions; stop the engine in abnormal conditions (overheating).