HomeControllersRDC2.4

RDC2.4 Controller

The RDC2.4 is a generator-set controller. It is used on generator sets from Kohler, including the RCA.

1
Generator sets
Kohler
Brand

Generator sets using this controller

1
Kohler RCA

Troubleshooting

3

Fault codes

CodeMeaningRemedy
Battery Low WarningsLow battery voltage warnings are displayed on the controller display.Check the battery connections and ensure they are secure. Replace the battery if it is low on charge.
Faults Related to ParallelingParalleling issues occur, such as incorrect synchronization or failure to maintain parallel operation.Verify that all paralleling settings are correct in the controller parameters. Check the paralleling cables and connections for any faults.
Main Power Overload ShutdownThe generator shuts down due to a main power overload.Check the circuit breaker and ensure it is not tripped. If necessary, replace the circuit breaker.

Fault codes and symptom→remedy steps extracted from this controller’s service/owner documentation; verify against the official manual before servicing. Aggregated from the service documentation of generator sets built on this controller.