The InteliGen 200 is a generator-set controller. It is used on generator sets from FPE, including the 625 M.
| Communications | Modbus RTU, RS485 |
|---|---|
| Digital inputs | 45 - 52 |
| Analog inputs | 8, A01 - A04 |
| Relay outputs | 7 - 12 |
| Operating temperature | -20 °C to +70 °C (BOUT 1 & 2) / -20 °C to +60 ºC (BOUT 3-8) |
| Dimensions | 187 x 132 mm, depth varies between 41 and 56 mm |
| Protections | Protection against large pulse power disturbances |
| Symptom |
|---|
| Alarms level 1 |
| Alarms level 2 |
| Fail sensor and other types |
Fault codes and symptom→remedy steps extracted from this controller’s service/owner documentation; verify against the official manual before servicing. Extracted directly from this controller's manual.