The EASYGEN-2000 is a generator-set controller.
| Digital inputs | [DI 7, DI 8, {0}, {1o}, {1oc}, {2oc}] |
|---|---|
| Relay outputs | [R1, R2, R3, R4, R5, R6, R7] |
| Protections | If the GCB is open, only V/f control is performed, If the GCB is closed and the MCB is open, V/f control as well as active and reactive power load sharing is performed, If the GCB is closed and the MCB is closed, P/PF control or import power control with load sharing and PF control is performed |
| Symptom | Remedy |
|---|---|
| Emergency stop | |
| Start request in AUTO | |
| Low oil pressure | |
| Coolant temperature | |
| External acknowledgement | |
| Release MCB | |
| Reply MCB | |
| Reply GCB | |
| Discrete Input 9 | |
| Discrete Input 10 | |
| Centralized alarm | Acknowledge the centralized alarm by pressing the button next to the '' symbol. The discrete output will re-enable if a new fault condition resulting in a centralized alarm occurs. |
| Open MCB | The controller enables this discrete output when the MCB is to be opened for switching operations. Ensure that all relay outputs are configured correctly before commissioning. |
| This discrete output is enabled when a shutdown alarm (class C or higher alarm; refer to Alarm Classes on page 269 for more information) is issued. |
Fault codes and symptom→remedy steps extracted from this controller’s service/owner documentation; verify against the official manual before servicing. Extracted directly from this controller's manual.