The DSE2510-MKII is a generator-set controller.
| Communications | Modbus RTU, RS485 |
|---|---|
| Dimensions | 245 mm x 184 mm x 51 mm (9.6 ” x 7.2 ” x 2.0 ”) |
| Protections | Follow main unit, Local |
| Symptom | Cause |
|---|---|
| Module appears to be ‘dead’ | Check polarity and size of the connected DC supply are within the specifications of the DSE25xx MKII module. |
| Host controller indicates there is a fault with communications with the remote display unit. | Check the connection of the DSENet® on the DSE25xx MKII unit, paying particular attention to the cable type being used. Check the connection on the Modbus port of the host controller, paying attention to the positioning of the termination resistor. Check both controllers’ configuration and refer to the relevant DSE controller software manual. |
Fault codes and symptom→remedy steps extracted from this controller’s service/owner documentation; verify against the official manual before servicing. Extracted directly from this controller's manual.